Source-backed diagnostic reference

C0042 Code: Meaning & Diagnostic Guide

Brake Pedal Position Sensor Circuit A

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does C0042 mean?

  • GENERIC: Brake Pedal Position Sensor Circuit A Source
  • GENERIC: Right Front Wheel Speed Sensor Circuit Low Source

C0042 quick answer

C0042 has conflicting generic definitions in the supplied references: “Brake Pedal Position Sensor Circuit A” and “Right Front Wheel Speed Sensor Circuit Low.” The code alone does not identify which description applies to a particular vehicle; confirm it using vehicle-specific service information and scan-tool data.

Is C0042 generic or manufacturer-specific?

C0042 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How C0042 works in the vehicle

C0042 is listed as a chassis code in one reference, but the supplied sources disagree about the circuit it describes. “Circuit A” identifies a named sensor circuit, while “circuit low” generally means the reported electrical signal is below the expected range. Neither description confirms that a sensor has failed.

C0042 symptoms

Depending on the vehicle and the applicable definition, a driver might notice a brake, ABS, or stability-control warning, or changes in braking-system behavior. These symptoms are not established by the code alone, and some vehicles may show no obvious symptoms.

Possible causes of C0042

Possible explanations depend on which definition applies and may include a wiring or connector issue, a signal or power-supply problem, or a sensor fault. The references do not establish a failed component or a specific cause.

How to diagnose C0042

  1. Check the vehicle’s make, model, year, and service information to identify the correct C0042 definition.
  2. Use a compatible scan tool to read all stored codes and available live data; note any warning messages and when they occur.
  3. Follow the vehicle-specific diagnostic procedure to check the relevant circuit, connectors, wiring, and sensor signals.
  4. Repair only a fault confirmed by testing, then clear the code if appropriate and verify whether it returns.

How to fix C0042

Do not replace a sensor based on C0042 alone. Have the applicable circuit diagnosed using vehicle-specific procedures; the appropriate repair depends on the test results.

Can I drive with C0042?

The code alone cannot determine whether the vehicle is safe to drive. If braking feels abnormal, a brake warning appears, or control-system behavior changes, stop driving when safe and seek professional inspection. Otherwise, consult the owner’s manual and arrange diagnosis promptly.

C0042 frequently asked questions

What does C0042 mean?

The supplied references give two different generic descriptions: a brake pedal position sensor circuit and a right front wheel speed sensor circuit low. Confirm the correct meaning for the specific vehicle.

Does C0042 prove that a sensor has failed?

No. The code descriptions do not confirm a failed sensor; wiring, connectors, or other circuit conditions may also need to be checked.

Can I diagnose C0042 from the code alone?

No. Use vehicle-specific service information and scan-tool results to identify the applicable circuit and guide testing.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.