Source-backed diagnostic reference

C058C Code: Meaning & Diagnostic Guide

Brake Booster Motor B Position Sensor Circuit Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does C058C mean?

  • GENERIC: Brake Booster Motor B Position Sensor Circuit Low Source
  • GENERIC: Brake Booster Motor B Position Sensor Circuit Low Source

C058C quick answer

C058C is a generic diagnostic trouble code for “Brake Booster Motor B Position Sensor Circuit Low.” It indicates that the monitored circuit signal is below the expected range; it does not, by itself, identify a confirmed failed part.

Is C058C generic or manufacturer-specific?

C058C has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How C058C works in the vehicle

The brake booster motor position sensor reports the motor’s position through an electrical circuit. “Circuit low” describes a signal reading that is lower than expected. The reason requires vehicle-specific diagnosis.

C058C symptoms

Depending on the vehicle and the underlying issue, there may be a brake-system warning light or a change in brake assist. These symptoms are not confirmed by the code alone.

Possible causes of C058C

Possibilities include a sensor or circuit problem, such as damaged wiring, a poor connection, or an issue with circuit power or ground. The code alone does not establish which, if any, is responsible.

How to diagnose C058C

  1. Confirm C058C with a suitable scan tool and note any other stored codes.
  2. Look up the code and test procedures in service information for the specific vehicle.
  3. Have a qualified technician inspect relevant connectors and wiring for visible damage or poor connections.
  4. Use vehicle-specific procedures to test the sensor circuit and determine whether the signal is actually out of range.

How to fix C058C

Repair should follow the test results and vehicle-specific service information. Do not assume the sensor or booster motor needs replacement based on C058C alone; consult a qualified repair professional for brake-system diagnosis.

Can I drive with C058C?

If braking feel or assist changes, or a brake warning appears, stop in a safe place and arrange professional assistance. If there are no noticeable symptoms, have the code assessed promptly and follow the vehicle’s owner’s manual guidance.

C058C frequently asked questions

What does C058C mean?

It generically describes a low signal in the brake booster motor B position sensor circuit.

Does C058C prove the position sensor has failed?

No. It identifies a circuit reading, not a confirmed failed component. Testing is needed to find the cause.

Can I keep driving with C058C?

The code alone cannot determine whether the vehicle is safe to drive. If braking behavior or assist changes, stop safely and seek professional help; otherwise, arrange prompt diagnosis.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.