Source-backed diagnostic reference

C058D Code: Meaning & Diagnostic Guide

Brake Booster Motor B Position Sensor Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does C058D mean?

  • GENERIC: Brake Booster Motor B Position Sensor Circuit High Source
  • GENERIC: Brake Booster Motor B Position Sensor Circuit High Source

C058D quick answer

C058D is a generic diagnostic trouble code for “Brake Booster Motor B Position Sensor Circuit High.” It indicates that the circuit signal is higher than the expected range; it does not by itself identify a failed part.

Is C058D generic or manufacturer-specific?

C058D has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How C058D works in the vehicle

The brake booster motor position sensor circuit reports information about motor position to the vehicle’s control system. “Circuit high” describes an electrical signal reading above the expected range. The cause and exact test values depend on the vehicle.

C058D symptoms

Possible signs may include a brake-system warning light, a stored code, or a change in brake-assist behavior. Some vehicles may show no obvious symptoms. These signs are not confirmed by the code alone.

Possible causes of C058D

Possible causes include a wiring or connector problem, an out-of-range sensor signal, a power or ground issue, or a fault elsewhere in the circuit. The code alone does not confirm which component, if any, has failed.

How to diagnose C058D

  1. Confirm C058D with a scan tool and note any other stored codes and available freeze-frame information.
  2. Check the vehicle’s service information for the circuit description, diagnostic procedure, and applicable specifications.
  3. Inspect accessible wiring and connectors for damage, looseness, corrosion, or poor contact.
  4. Have a qualified technician test the circuit using the vehicle-specific procedure and appropriate equipment.
  5. Confirm the repair by clearing codes only after addressing the identified issue, then rechecking for returning codes.

How to fix C058D

Repair should follow the results of vehicle-specific testing. Depending on the findings, this may involve correcting a wiring or connector issue or addressing a confirmed sensor or circuit fault. Avoid replacing parts based only on C058D.

Can I drive with C058D?

The code alone cannot establish whether the vehicle is safe to drive. If braking or brake assist feels different, a brake warning appears, or stopping becomes difficult, stop driving when safe and arrange professional inspection. Otherwise, consult the vehicle’s manual and have the code diagnosed promptly.

C058D frequently asked questions

Does C058D mean the brake booster motor sensor has failed?

No. It indicates a high signal in the brake booster motor B position sensor circuit, but testing is needed to identify the cause.

Can a wiring problem trigger C058D?

Yes. Wiring or connector problems are among the possible causes, but the code does not confirm one.

Can I diagnose C058D without vehicle-specific information?

A basic inspection may reveal visible damage, but circuit testing and specifications should come from service information for the vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.