Source-backed diagnostic reference

C058E Code: Meaning & Diagnostic Guide

Brake Booster Motor B Position Sensor Circuit Range/Performance

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does C058E mean?

  • GENERIC: Brake Booster Motor B Position Sensor Circuit Range/Performance Source
  • GENERIC: Brake Booster Motor B Position Sensor Circuit Range/Performance Source

C058E quick answer

C058E is a generic diagnostic trouble code for “Brake Booster Motor B Position Sensor Circuit Range/Performance.” It indicates that the sensor circuit’s signal or behavior is outside expected limits; it does not by itself identify a failed part.

Is C058E generic or manufacturer-specific?

C058E has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How C058E works in the vehicle

The brake booster helps reduce the effort needed to apply the brakes. “Motor B” identifies a motor designation used by the relevant system, while “range/performance” means the control system detected an unexpected sensor reading or response. The exact system design and test limits can vary by vehicle.

C058E symptoms

C058E may appear with a brake-system warning or a change in brake-assist behavior, but the supplied code definition does not establish that any symptom is present. Check the vehicle’s warnings and behavior rather than assuming a particular symptom.

Possible causes of C058E

Possible areas to investigate include the position sensor circuit, its wiring or connectors, the motor or booster system, or a control-system issue. The code alone does not confirm which component, if any, has failed.

How to diagnose C058E

  1. Confirm C058E with a scan tool and record any related codes and available freeze-frame information.
  2. Use service information for the specific vehicle to identify the system, circuit, and applicable test specifications.
  3. Have a qualified technician inspect the relevant wiring and connectors for visible damage, looseness, or corrosion.
  4. Test sensor readings and system operation against vehicle-specific procedures; do not replace a part based on the code alone.

How to fix C058E

Choose a repair only after vehicle-specific testing identifies the cause. Depending on the findings, the issue may involve a connection, wiring, sensor, motor, booster assembly, or another system fault. Brake-system diagnosis and repair should follow the vehicle maker’s service procedures.

Can I drive with C058E?

The code alone does not determine whether the vehicle is safe to drive. If braking feels different, brake assist seems reduced, or a brake warning appears, stop when safe and arrange prompt professional inspection. If braking operates normally and no warning is present, consult vehicle-specific guidance and have the code diagnosed soon.

C058E frequently asked questions

What does C058E mean?

It is a generic code for a brake booster Motor B position sensor circuit range/performance issue. It flags unexpected circuit behavior, not a confirmed failed component.

Does C058E mean the position sensor must be replaced?

No. Wiring, connectors, the motor or booster system, and other faults may need to be considered. Testing against vehicle-specific specifications is needed before choosing a repair.

Can I drive with C058E?

The code alone cannot establish that. If braking behavior changes or a brake warning appears, stop when safe and seek prompt professional help; otherwise, arrange diagnosis using guidance for your vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.