Source-backed diagnostic reference

C0602 Code: Meaning & Diagnostic Guide

Active Air Dam Control Circuit Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does C0602 mean?

  • GENERIC: Active Air Dam Control Circuit Low Source
  • GENERIC: Active Air Dam Control Circuit Low Source

C0602 quick answer

C0602 is a generic diagnostic trouble code for “Active Air Dam Control Circuit Low.” It indicates that the control circuit’s signal or voltage is lower than expected; it does not, by itself, identify a failed part.

Is C0602 generic or manufacturer-specific?

C0602 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How C0602 works in the vehicle

An active air dam is a movable panel used to manage airflow. “Circuit low” describes an electrical reading below the expected range. The code definition is generic, so the vehicle’s service information is needed to determine how the system is configured and what test values apply.

C0602 symptoms

Depending on the vehicle and whether the system is fitted, possible signs include a warning light or message, an air dam that does not move as expected, or no noticeable symptoms.

Possible causes of C0602

Possible explanations include a wiring or connector issue, a problem with the air dam mechanism or its control hardware, or a low circuit reading caused by another electrical fault. C0602 alone does not confirm any specific cause.

How to diagnose C0602

  1. Confirm the exact code and check for other stored codes using a compatible scan tool.
  2. Look up C0602 in service information for the specific vehicle; circuit details and test procedures can vary.
  3. Check the air dam and accessible wiring or connectors for visible damage, obstruction, or loose connections.
  4. Have a qualified technician test the circuit and system components using the vehicle-specific procedure before replacing parts.

How to fix C0602

Base repairs on vehicle-specific test results. Correct any confirmed wiring, connection, mechanical, or control-system fault, then clear the code and check whether it returns. Do not replace a component based on C0602 alone.

Can I drive with C0602?

The code alone does not establish whether the vehicle is safe to drive. Check the owner’s manual and heed any warnings or changes in vehicle behavior. If a warning indicates a serious problem or the air dam is loose or obstructing movement, seek professional advice before driving.

C0602 frequently asked questions

What does C0602 mean?

It is a generic code for an Active Air Dam Control Circuit Low condition, meaning the circuit signal or voltage is below the expected range.

Does C0602 prove the air dam actuator has failed?

No. The code identifies a low circuit reading, not a confirmed failed component. Vehicle-specific diagnosis is needed.

Can I drive with C0602?

The code alone cannot determine drivability. Follow the vehicle’s warnings and owner’s manual, and get professional advice if there are serious warnings or visible damage.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.