Source-backed diagnostic reference

C108000 Code: Meaning & Diagnostic Guide

“Left-/right hand driving switch-over active,” reported in the Headlamp Range Control module. The source confirms the code and description on a 2015 Audi A7, but does not establish applicability to a 2021+ BEV or PHEV.

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does C108000 mean?

  • GENERIC: “Left-/right hand driving switch-over active,” reported in the Headlamp Range Control module. The source confirms the code and description on a 2015 Audi A7, but does not establish applicability to a 2021+ BEV or PHEV. Source

C108000 quick answer

C108000 is described as “Left-/right hand driving switch-over active” in the Headlamp Range Control module. The available reference confirms this description on a 2015 Audi A7 only; it does not establish applicability to other vehicles or model years.

Is C108000 generic or manufacturer-specific?

C108000 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How C108000 works in the vehicle

The code description refers to a left-/right-hand driving switch-over status associated with headlamp range control. In plain language, it may indicate that a lighting configuration for driving on the opposite side of the road is active. The reference does not show whether this status is expected, what triggered it, or whether it represents a fault.

C108000 symptoms

No symptoms are established by the supplied evidence. Depending on the vehicle and configuration, a lighting-mode mismatch could be associated with an instrument-panel warning or headlamp beam behavior that needs checking, but neither is confirmed for this code.

Possible causes of C108000

The evidence does not identify a cause or failed component. A vehicle-specific setting, coding, or configuration may be relevant, but these are possibilities to verify rather than confirmed causes.

How to diagnose C108000

  1. Confirm the vehicle’s make, model, year, market, and the module reporting C108000.
  2. Read the complete diagnostic report, including any other codes and the code’s status or accompanying description.
  3. Check the vehicle-specific owner information or service documentation to determine whether a left-/right-hand driving switch-over setting is available and appropriate.
  4. Have a qualified technician verify the headlamp configuration and operation using procedures for the exact vehicle.
  5. Do not replace parts or change coding based on this code description alone.

How to fix C108000

No specific repair is supported by the supplied evidence. If the setting is unintended or headlamp operation is abnormal, ask a qualified technician to verify the vehicle’s configuration and follow its service information. The code alone does not establish that a component has failed.

Can I drive with C108000?

The evidence does not establish a universal driving restriction. If the headlamps appear mis-aimed, provide poor visibility, or could dazzle other road users, avoid driving in conditions where lighting is important until they are checked.

C108000 frequently asked questions

What does C108000 mean?

Its supplied description is “Left-/right hand driving switch-over active,” reported in the Headlamp Range Control module.

Does C108000 prove that a headlamp component has failed?

No. The reference gives a status description but does not identify a failed component or confirm a specific cause.

Does this code apply to every vehicle?

That is not established. The reference confirms the description on a 2015 Audi A7 and does not establish applicability to other vehicles or model years.

Can I clear C108000 without further checks?

The evidence does not recommend clearing it. First confirm the vehicle-specific meaning and whether the reported lighting configuration is appropriate.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.