Source-backed diagnostic reference

C1113 Code: Meaning & Diagnostic Guide

ABS Power Relay Coil Short Circuit To Battery

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does C1113 mean?

  • OTHER: ABS Power Relay Coil Short Circuit To Battery Source

C1113 quick answer

C1113 is described as an ABS power relay coil short circuit to battery. It indicates that the ABS system detected battery voltage where it was not expected in the relay-coil circuit; it does not, by itself, confirm which part has failed.

Is C1113 generic or manufacturer-specific?

C1113 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How C1113 works in the vehicle

In plain language, a “short to battery” means an electrical circuit may be receiving voltage through an unintended path. The exact C1113 definition and test procedure can vary by vehicle, so check the service information for the specific make, model, and year.

C1113 symptoms

Possible signs include an ABS warning light or a stored ABS fault. Depending on the vehicle and the underlying issue, ABS operation may be affected. Symptoms alone cannot confirm the cause.

Possible causes of C1113

Possible causes include damaged wiring or insulation, a poor or damaged connector, or a problem involving the ABS power relay or its coil circuit. These are possibilities, not confirmed failures.

How to diagnose C1113

  1. Confirm the exact vehicle details and look up the manufacturer-specific definition of C1113.
  2. Use a compatible scan tool to read ABS codes and relevant freeze-frame or live data, if available.
  3. Have a qualified technician inspect the relay-coil circuit, wiring, connectors, and relay against the vehicle’s service information.
  4. After any verified repair, clear the code and check whether it returns under the conditions described by the service procedure.

How to fix C1113

The correct repair depends on circuit testing; replacing the relay based on the code alone may not address the cause. Have a qualified technician diagnose the ABS electrical circuit. Do not attempt hazardous electrical work.

Can I drive with C1113?

Consult the vehicle manual and arrange prompt diagnosis if the ABS warning is on. If braking feels abnormal, a red brake warning appears, or the manual advises stopping, pull over safely and seek assistance. Do not assume ABS is operating normally.

C1113 frequently asked questions

Does C1113 mean the ABS relay has failed?

No. It identifies a detected short-to-battery condition in the ABS power relay coil circuit, but testing is needed to identify the cause.

Can a wiring problem cause C1113?

It can be one possibility, such as damaged insulation or a connector issue. The circuit should be checked using vehicle-specific service information.

Is C1113 the same on every vehicle?

Not necessarily. The supplied description is a general definition; manufacturer-specific meaning and diagnostic procedures may differ.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.