Source-backed diagnostic reference

C1136 Code: Meaning & Diagnostic Guide

Gear Select position short to ground

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does C1136 mean?

  • OTHER: Gear Select position short to ground Source

C1136 quick answer

C1136 is listed as “Gear Select position short to ground.” It indicates a reported electrical short-to-ground condition associated with a gear-select position circuit, but the code alone does not identify a failed part.

Is C1136 generic or manufacturer-specific?

C1136 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How C1136 works in the vehicle

A short to ground means an electrical circuit may be making an unintended connection to the vehicle’s ground. C1136 is categorized as a chassis code. Its precise meaning and diagnostic procedure can vary by vehicle, so confirm the definition using vehicle-specific service information.

C1136 symptoms

Depending on the vehicle and whether the issue affects gear selection, possible signs may include an incorrect or inconsistent gear-position display or difficulty selecting a gear. These symptoms are not confirmed by the code description alone.

Possible causes of C1136

Possible areas to investigate include wiring or connectors in the gear-select position circuit, but C1136 does not establish a specific cause or failed component.

How to diagnose C1136

  1. Confirm the exact C1136 definition and diagnostic procedure for the vehicle using its service information.
  2. Record all stored codes and relevant scan-tool data before clearing anything.
  3. Check whether the displayed gear position matches the selected position and note any intermittent behavior.
  4. Have a qualified technician inspect the relevant circuit and connectors for damage, corrosion, loose connections, or an unintended path to ground.
  5. Follow the vehicle-specific electrical tests to isolate the cause; do not replace parts based only on the code.

How to fix C1136

The appropriate repair depends on test results and may involve correcting a wiring or connection fault. Ask a qualified technician to diagnose the vehicle using its specific service information; the code alone does not justify replacing a gear selector or other component.

Can I drive with C1136?

If gear selection or the indicated gear position is unreliable, avoid driving and arrange professional inspection. If there are no apparent operating problems, consult the vehicle’s manual or a technician for advice specific to the vehicle.

C1136 frequently asked questions

What does code C1136 mean?

The supplied code reference describes C1136 as “Gear Select position short to ground.” Confirm the exact interpretation for your vehicle.

Does C1136 identify a failed gear selector?

No. It points to a reported short-to-ground condition associated with the gear-select position circuit, but further testing is needed to identify the cause.

Can I keep driving with C1136?

Driving advice depends on how the vehicle behaves. If gear selection or the gear-position display is unreliable, avoid driving and seek professional inspection.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.