Source-backed diagnostic reference

C1142 Code: Meaning & Diagnostic Guide

Wheel Speed Sensor RF Tone Ring Tooth Missing Fault

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does C1142 mean?

  • OTHER: Wheel Speed Sensor RF Tone Ring Tooth Missing Fault Source

C1142 quick answer

C1142 is listed as a right-front (RF) wheel-speed sensor tone-ring tooth-missing fault. It indicates a possible problem with the wheel-speed signal or tone-ring pattern; it does not by itself confirm which part has failed.

Is C1142 generic or manufacturer-specific?

C1142 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How C1142 works in the vehicle

A wheel-speed sensor reads a patterned tone ring as the wheel turns. The vehicle can use this signal for systems such as ABS or stability control. “Tooth missing” describes an irregularity detected in the signal pattern, not proof that a tone-ring tooth is physically missing.

C1142 symptoms

Depending on the vehicle and the underlying issue, possible signs include an ABS or stability-control warning, stored fault codes, or those systems behaving differently. Some vehicles may show no obvious symptoms. The supplied reference does not establish a specific symptom for every vehicle with C1142.

Possible causes of C1142

Possible explanations include damage or contamination affecting the tone ring, a problem with the sensor or its wiring or connector, or an issue with the signal being read. These are diagnostic possibilities, not confirmed causes; vehicle-specific information is needed.

How to diagnose C1142

  1. Confirm the code with a scan tool and check for other stored codes and relevant warning lights.
  2. Consult service information for the specific vehicle to confirm what C1142 means and which wheel or signal it identifies.
  3. Have a qualified technician inspect the right-front sensor area, wiring, connector, and tone ring for visible damage or contamination.
  4. If needed, compare live wheel-speed data or test the signal using the vehicle maker’s diagnostic procedure.

How to fix C1142

Address the cause confirmed by diagnosis rather than replacing parts based on the code alone. A technician can determine whether cleaning, repairing wiring, or replacing a damaged component is appropriate for the specific vehicle.

Can I drive with C1142?

The code alone cannot establish whether the vehicle is safe to drive. If braking or stability warnings are present, braking feels abnormal, or handling changes, stop in a safe place and seek qualified assistance. Otherwise, consult the owner’s manual and arrange diagnosis promptly.

C1142 frequently asked questions

What does C1142 mean?

The supplied reference describes C1142 as a right-front wheel-speed sensor tone-ring tooth-missing fault. The code identifies a detected signal-pattern issue, not a confirmed failed part.

Does C1142 prove a tone-ring tooth is missing?

No. “Tooth missing” is the fault description, but inspection and vehicle-specific testing are needed to determine whether the ring is damaged or another issue is affecting the signal.

Can I keep driving with C1142?

The code alone does not determine driving safety. Follow the owner’s manual and seek prompt inspection, especially if braking, ABS, stability-control warnings, or handling are affected.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.