Source-backed diagnostic reference

C1143 Code: Meaning & Diagnostic Guide

Wheel Speed Sensor LR Tone Ring Tooth Missing Fault

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does C1143 mean?

  • OTHER: Wheel Speed Sensor LR Tone Ring Tooth Missing Fault Source

C1143 quick answer

C1143 is described as a left-rear wheel speed sensor tone ring tooth-missing fault. It means the system has detected a signal pattern consistent with a missing or unreadable tone-ring tooth; it does not by itself confirm which part has failed.

Is C1143 generic or manufacturer-specific?

C1143 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How C1143 works in the vehicle

A wheel speed sensor reads a rotating toothed ring, also called a tone ring, to help determine wheel speed. C1143 is categorized as a chassis code and refers to the left-rear wheel signal. The code description alone does not identify the vehicle, confirm physical damage, or establish a failed component.

C1143 symptoms

Depending on the vehicle and the underlying issue, possible signs may include an ABS or traction-control warning, stored wheel-speed fault data, or changes in those systems’ operation. Some vehicles may show no obvious symptoms.

Possible causes of C1143

Possibilities include a damaged, corroded, or obstructed tone ring; an issue with the wheel speed sensor or its wiring; or a problem affecting the sensor-to-ring relationship. These are diagnostic possibilities, not confirmed causes of C1143.

How to diagnose C1143

  1. Confirm the exact code and check for related codes using a suitable scan tool.
  2. Review available wheel-speed data and compare the left-rear reading with readings from other wheels under appropriate test conditions.
  3. Inspect the left-rear sensor, wiring, connector, and tone ring for visible damage, contamination, corrosion, or looseness.
  4. Use vehicle-specific service information to check sensor installation and signal requirements.
  5. Have a qualified technician determine the cause before replacing parts or clearing the code.

How to fix C1143

The appropriate repair depends on the diagnostic findings. A technician may need to address a wiring or connection issue, clean or repair a tone ring, or replace a confirmed faulty component. Do not treat the code description alone as proof that the tone ring or sensor must be replaced.

Can I drive with C1143?

Driving advice depends on the vehicle’s warnings and behavior. If ABS or traction-control warnings are on, those functions may be limited; consult the owner’s manual and arrange an inspection. If braking or handling feels abnormal, stop somewhere safe and seek professional assistance.

C1143 frequently asked questions

What does C1143 mean?

C1143 is described as a left-rear wheel speed sensor tone ring tooth-missing fault. It indicates a detected signal concern, not a confirmed failed part.

Does C1143 prove that a tone ring tooth is missing?

No. The code description identifies a signal pattern associated with a missing tooth, but inspection and testing are needed to establish the cause.

Can a sensor or wiring issue also be involved?

Yes. A sensor, connector, wiring, or tone-ring condition may affect the wheel-speed signal. These are possibilities that need to be checked.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.