Source-backed diagnostic reference

C1144 Code: Meaning & Diagnostic Guide

Wheel Speed Sensor RR Tone Ring Tooth Missing Fault

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does C1144 mean?

  • OTHER: Wheel Speed Sensor RR Tone Ring Tooth Missing Fault Source

C1144 quick answer

C1144 is described as a wheel-speed sensor right-rear tone-ring tooth-missing fault. It indicates a detected signal pattern associated with a missing tone-ring tooth, but does not by itself confirm which part has failed.

Is C1144 generic or manufacturer-specific?

C1144 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How C1144 works in the vehicle

A tone ring is a toothed or patterned component that works with a wheel-speed sensor to produce a signal as the wheel turns. “RR” means right rear. This chassis code describes a fault involving that signal; the code alone does not establish that the tone ring is physically damaged.

C1144 symptoms

Depending on the vehicle and fault, possible signs may include a warning light or an issue with a system that relies on wheel-speed information. Some vehicles may show no obvious symptoms. The supplied evidence does not establish specific symptoms.

Possible causes of C1144

Possibilities to investigate include a damaged or contaminated tone ring, a problem with the right-rear wheel-speed sensor or its wiring, or another issue affecting the signal. The code alone does not identify a confirmed cause.

How to diagnose C1144

  1. Use a scan tool to confirm C1144 and check for related codes and available wheel-speed data.
  2. Compare right-rear wheel-speed readings with other wheels, if the scan tool supports this, following vehicle-specific service information.
  3. Have a qualified technician inspect the right-rear sensor, wiring, connectors, and tone ring for visible damage or contamination.
  4. Use vehicle-specific diagnostic procedures to determine the cause before replacing parts.

How to fix C1144

Repair or replace components only after testing confirms the cause. Follow the vehicle manufacturer's service information or consult a qualified technician; this code alone is not enough to justify replacing the sensor or tone ring.

Can I drive with C1144?

The code alone cannot determine whether the vehicle is safe to drive. If warning lights, braking or stability-control changes, or unusual handling occur, stop when safe and seek professional advice. Otherwise, arrange a prompt inspection and follow the vehicle's owner manual.

C1144 frequently asked questions

What does C1144 mean?

It is described as a right-rear wheel-speed sensor tone-ring tooth-missing fault, meaning the detected signal is consistent with a missing-tooth condition.

Does C1144 confirm a broken tone ring?

No. The code identifies a fault pattern, not a confirmed failed component. Inspection and testing are needed.

Can I drive with C1144?

The code alone does not establish whether driving is safe. Consider any warning lights or changes in braking or handling, consult the owner manual, and arrange an inspection.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.