C1164 Code: Meaning & Diagnostic Guide
Park Brake Actuator Assembly Switch Circuit Failure
What does C1164 mean?
- OTHER: Park Brake Actuator Assembly Switch Circuit Failure Source
C1164 quick answer
C1164 is listed as a chassis code for a park brake actuator assembly switch circuit failure. The code points to a detected issue in that circuit; it does not by itself confirm which part has failed.
Is C1164 generic or manufacturer-specific?
C1164 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How C1164 works in the vehicle
The park brake actuator operates or monitors the parking brake, and its switch circuit provides an electrical signal. C1164 indicates that the signal or circuit did not meet the conditions expected by the vehicle’s control system. The exact meaning and test procedure can vary by vehicle.
C1164 symptoms
Depending on the vehicle and the underlying issue, possible signs include a parking-brake warning light, a warning message, or unusual parking-brake operation. Some vehicles may show no obvious symptom.
Possible causes of C1164
Possible causes include a wiring or connector problem, an issue with the actuator switch or assembly, or a related control-system fault. The code alone does not establish the cause.
How to diagnose C1164
- Record the code and any other stored codes, warning messages, and symptoms.
- Check the vehicle’s service information for the specific definition and diagnostic procedure for C1164.
- Have a qualified technician inspect the relevant wiring and connectors for visible damage or poor connections.
- Use the vehicle-specific procedure and suitable diagnostic equipment to test the switch circuit and related components before replacing parts.
How to fix C1164
Repair should follow the vehicle-specific diagnosis. Depending on test results, this may involve correcting a wiring or connection issue or servicing a related component. Do not replace the actuator based on the code alone.
Can I drive with C1164?
If the parking brake does not release or hold as expected, or a brake warning remains on, avoid relying on the vehicle until it has been assessed. If operation seems normal, arrange diagnosis promptly and follow the vehicle’s manual; the code alone cannot determine whether driving is safe.
C1164 frequently asked questions
What does C1164 mean?
It is listed as a park brake actuator assembly switch circuit failure code. Its precise interpretation depends on the vehicle.
Does C1164 prove the actuator has failed?
No. It identifies a circuit-related fault, but diagnosis is needed to determine whether the issue is in wiring, a switch, an actuator assembly, or another related part.
Can I drive with C1164?
The code alone cannot establish whether driving is safe. If the parking brake behaves abnormally or a brake warning remains on, avoid relying on the vehicle and seek professional assessment.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.