Source-backed diagnostic reference

C1174 Code: Meaning & Diagnostic Guide

Park Brake Switch # 2 Applied Circuit Failure

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does C1174 mean?

  • OTHER: Park Brake Switch # 2 Applied Circuit Failure Source

C1174 quick answer

C1174 is listed as “Park Brake Switch #2 Applied Circuit Failure.” It points to a fault involving the electrical circuit for a park-brake switch input; it does not, by itself, identify a failed part.

Is C1174 generic or manufacturer-specific?

C1174 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How C1174 works in the vehicle

“Applied” refers to the switch signal indicating that the park brake is applied. “Circuit failure” means the signal or its electrical path may not behave as expected. The exact circuit design and diagnostic criteria can vary by vehicle.

C1174 symptoms

Possible signs include a park-brake warning that stays on or behaves inconsistently, or a related warning message. The code may also be stored without an obvious symptom. These signs are not confirmed by the code alone.

Possible causes of C1174

Possible causes include a switch or connector issue, damaged wiring, a poor electrical connection, or a fault elsewhere in the circuit. C1174 alone does not confirm which, if any, is responsible.

How to diagnose C1174

  1. Confirm the code with a scan tool and note any other stored codes.
  2. Check the vehicle-specific service information for C1174, including the circuit description and test criteria.
  3. Inspect accessible park-brake switch wiring and connectors for visible damage or loose connections.
  4. Have a qualified technician test the circuit according to the vehicle’s service procedure before replacing parts.

How to fix C1174

The repair depends on the test results. A technician may need to address a connection, wiring, switch, or another circuit issue. Do not replace a component based on C1174 alone.

Can I drive with C1174?

The code alone does not establish whether the vehicle is safe to drive. If the park brake does not release or hold as expected, or a warning remains on, consult the owner’s manual and arrange an inspection before relying on the system.

C1174 frequently asked questions

What does C1174 mean?

It is listed as a Park Brake Switch #2 Applied Circuit Failure, indicating a possible problem with the electrical circuit for that switch input.

Does C1174 mean the park-brake switch has failed?

No. The code identifies a circuit fault, not a confirmed failed component. Diagnosis is needed to identify the cause.

Can I drive with C1174?

The code alone cannot determine whether driving is safe. Check for park-brake operation or warning issues and follow the vehicle’s manual; seek an inspection if operation is abnormal.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.