Source-backed diagnostic reference

C1464 Code: Meaning & Diagnostic Guide

Pressure Transducer Redundant / Secondary Signal Faulted

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does C1464 mean?

  • OTHER: Pressure Transducer Redundant / Secondary Signal Faulted Source

C1464 quick answer

C1464 is described as a fault in a pressure transducer’s redundant or secondary signal. The exact meaning and diagnostic procedure can vary by vehicle, so confirm it using vehicle-specific service information.

Is C1464 generic or manufacturer-specific?

C1464 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How C1464 works in the vehicle

A pressure transducer measures pressure and sends an electrical signal to a control system. “Redundant” or “secondary” refers to an additional signal used for comparison or backup. C1464 indicates that this signal was reported as faulty; it does not by itself confirm that the transducer has failed.

C1464 symptoms

Depending on the vehicle and system involved, a related warning light or change in system operation may occur. The code alone does not establish what symptoms, if any, will be present.

Possible causes of C1464

Possible explanations include a problem with the transducer signal, its wiring or connector, or the system interpreting that signal. These are possibilities, not confirmed causes.

How to diagnose C1464

  1. Check the vehicle-specific definition of C1464 and identify which system uses the pressure transducer.
  2. Scan for other codes and note when the fault occurs; related codes may help narrow the diagnosis.
  3. Using the manufacturer’s service information, inspect the relevant wiring and connectors for visible damage or poor connection.
  4. Have a qualified technician compare the transducer signals and system data with the vehicle’s specified values before replacing parts.

How to fix C1464

Do not replace the transducer based on C1464 alone. Diagnosis should confirm whether the issue is with the signal, wiring, connection, or another part of the system. Use vehicle-specific repair information or consult a qualified technician.

Can I drive with C1464?

The code alone does not establish whether the vehicle is safe to drive. Follow any vehicle warnings and owner’s-manual guidance; if system operation is abnormal or a safety warning appears, stop when safe and seek professional advice.

C1464 frequently asked questions

Does C1464 confirm a failed pressure transducer?

No. It reports a fault with the redundant or secondary signal, but further testing is needed to identify the cause.

Can the meaning of C1464 vary by vehicle?

Yes. Confirm the definition and diagnostic procedure using service information for the specific vehicle.

Should I replace a part immediately?

No. Check for related codes and have the signal and associated wiring inspected before deciding on a repair.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.