Source-backed diagnostic reference

C1795 Code: Meaning & Diagnostic Guide

Air Suspension RR Air Spring/Shock Solenoid Output Circuit Failure

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does C1795 mean?

  • OTHER: Air Suspension RR Air Spring/Shock Solenoid Output Circuit Failure Source

C1795 quick answer

C1795 is listed in the supplied reference as an air-suspension rear-right air spring/shock solenoid output circuit failure. Its meaning and diagnostic procedure may vary by vehicle.

Is C1795 generic or manufacturer-specific?

C1795 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How C1795 works in the vehicle

The code points to a possible electrical-circuit problem involving the solenoid that controls the rear-right air spring or shock. “Output circuit failure” describes a fault detected in the circuit; it does not, by itself, confirm which part has failed.

C1795 symptoms

Depending on the vehicle and the underlying issue, possible signs include a suspension warning, uneven ride height, or a change in ride comfort. Some vehicles may show no obvious symptoms.

Possible causes of C1795

Possibilities include damaged wiring or connectors, a solenoid fault, a power or ground issue, or a control-module or circuit problem. The code alone does not establish the cause.

How to diagnose C1795

  1. Confirm the code and check for other stored suspension codes using a scan tool suitable for the vehicle.
  2. Look up the code and test procedure in vehicle-specific service information; applicability can vary.
  3. Have a qualified technician inspect the relevant wiring and connectors for damage, corrosion, or loose connections.
  4. Use the vehicle’s wiring diagram and approved test procedure to check the circuit and solenoid before replacing parts.

How to fix C1795

Repair or replace components only after vehicle-specific testing identifies the fault. Clear the code and verify the repair using the service procedure. Avoid replacing the solenoid based on C1795 alone.

Can I drive with C1795?

The code alone does not determine whether the vehicle is safe to drive. If ride height or handling changes, a warning appears, or the vehicle is difficult to control, stop driving when safe and arrange an inspection. Follow the vehicle owner’s manual.

C1795 frequently asked questions

What does C1795 mean?

The supplied reference describes C1795 as an air-suspension rear-right air spring/shock solenoid output circuit failure. Confirm the definition for the specific vehicle.

Does C1795 prove the solenoid has failed?

No. It identifies a possible circuit fault, not a confirmed failed component. Wiring, connections, or other circuit components may also need testing.

Can I keep driving with C1795?

The code alone cannot determine that. If suspension height, ride, or handling is affected, seek inspection and consult the owner’s manual.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.