Source-backed diagnostic reference

C1904 Code: Meaning & Diagnostic Guide

Ride Control RR Shock Actuator Circuit Short To Ground

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does C1904 mean?

  • OTHER: Ride Control RR Shock Actuator Circuit Short To Ground Source

C1904 quick answer

C1904 is described as a ride-control rear shock actuator circuit short to ground. It points to an electrical-circuit fault, but does not by itself confirm that the shock actuator has failed.

Is C1904 generic or manufacturer-specific?

C1904 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How C1904 works in the vehicle

In this description, “RR” means rear right. A “short to ground” means the circuit may have an unintended electrical path to the vehicle’s ground. The exact system and diagnostic procedure can vary by vehicle, so check the vehicle-specific service information.

C1904 symptoms

Depending on the vehicle and whether the fault is active, possible context may include a ride-control warning, a stored fault code, or a change in suspension behavior. C1904 alone does not establish which symptoms are present.

Possible causes of C1904

Possibilities include damaged wiring, a poor or contaminated connector, a circuit fault, or an actuator problem. The code alone does not identify the cause or confirm a failed component.

How to diagnose C1904

  1. Confirm the code with a scan tool and note any other codes or relevant warning messages.
  2. Check the vehicle’s service information to confirm how C1904 applies to that make, model, and year.
  3. With the vehicle made safe for inspection, look for visible damage, corrosion, or loose connections in the relevant wiring and connectors.
  4. Have a qualified technician test the circuit and actuator using the vehicle-specific procedure before replacing parts.

How to fix C1904

Base repairs on test results. A technician may need to repair wiring or a connector, or address an actuator fault if testing confirms it. Clear the code and verify the repair using the appropriate service procedure.

Can I drive with C1904?

Driving impact cannot be determined from C1904 alone. If a ride-control warning appears or handling changes, use caution and arrange an inspection; stop driving if the vehicle feels unsafe to control.

C1904 frequently asked questions

What does C1904 mean?

The supplied description defines C1904 as a ride-control rear shock actuator circuit short to ground. Vehicle-specific meaning and procedures can vary.

Does C1904 mean the rear shock actuator is bad?

No. It indicates a reported circuit condition, not a confirmed failed actuator. Wiring, connectors, and the actuator may need testing.

Can I keep driving with C1904?

The code alone does not establish whether the vehicle is safe to drive. Consider any warning messages or handling changes and seek an inspection if they occur.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.