P0006 Code: Meaning & Diagnostic Guide
Fuel Shutoff Valve A Control Circuit Low
What does P0006 mean?
P0006 quick answer
P0006 is a generic diagnostic trouble code for “Fuel Shutoff Valve A Control Circuit Low.” It indicates that the vehicle detected a low electrical signal in that control circuit; it does not by itself confirm a failed valve.
Is P0006 generic or manufacturer-specific?
P0006 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P0006 works in the vehicle
“Circuit low” means the detected electrical level was below the expected range. “A” identifies a circuit or component designation that can vary by vehicle, so check the vehicle’s service information for its exact meaning.
P0006 symptoms
Depending on the vehicle and the underlying issue, possible signs may include a warning light, difficulty starting, or engine performance problems. Some vehicles may show no obvious symptoms.
Possible causes of P0006
Possible explanations include damaged wiring, a poor connector connection, a problem with the fuel shutoff valve circuit, or a control-system issue. The code alone does not identify the cause.
How to diagnose P0006
- Record P0006 and any other stored codes and note when the symptoms occur.
- Look up the code and the meaning of circuit “A” in service information for the specific vehicle.
- With the vehicle safely off, check accessible wiring and connectors associated with the circuit for visible damage or loose connections.
- Have a qualified technician test the circuit using the vehicle-specific diagnostic procedure before replacing parts.
How to fix P0006
Repair should follow the confirmed cause and the vehicle’s service information. Avoid replacing the valve based on P0006 alone; circuit testing may be needed to distinguish a wiring or connection problem from a component or control issue.
Can I drive with P0006?
Driving advice depends on symptoms and the vehicle. If it will not start, runs poorly, or shows other serious warning signs, stop in a safe place and arrange professional help. If it appears to run normally, have the code assessed promptly and follow the vehicle manual.
P0006 frequently asked questions
Does P0006 mean the fuel shutoff valve has failed?
No. It identifies a low signal in the fuel shutoff valve “A” control circuit, but further diagnosis is needed to determine the cause.
What does “circuit low” mean?
It means the vehicle detected an electrical level below the expected range in the monitored circuit.
Is P0006 the same on every vehicle?
The generic definition is “Fuel Shutoff Valve A Control Circuit Low,” but the exact circuit designation and diagnostic procedure can depend on the vehicle.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.