P0106 Code: Meaning & Diagnostic Guide
Manifold Absolute Pressure/Barometric Pressure Sensor Circuit Range/Performance
What does P0106 mean?
P0106 quick answer
P0106 means the engine computer has detected a range or performance issue in the Manifold Absolute Pressure (MAP) or barometric pressure sensor circuit. It does not, by itself, confirm that the sensor has failed.
Is P0106 generic or manufacturer-specific?
P0106 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P0106 works in the vehicle
The MAP sensor reports intake manifold pressure, which helps the engine computer assess engine load. “Range/performance” means the reported value may be outside an expected range or may not behave as expected. The precise interpretation and test procedure can vary by vehicle.
P0106 symptoms
Depending on the vehicle and the underlying issue, possible symptoms may include a warning light, rough running, reduced performance, or changes in fuel economy. Some vehicles may show few noticeable symptoms.
Possible causes of P0106
Possible causes include a sensor signal that is inaccurate, a wiring or connector problem, an intake or pressure-related issue, or another condition affecting the reading. P0106 alone does not identify the cause.
How to diagnose P0106
- Record P0106 and any other stored or pending codes, along with available freeze-frame data.
- Consult service information for the specific vehicle’s code criteria and test procedures.
- Visually check the MAP sensor connector and accessible wiring for damage, looseness, or corrosion.
- Check relevant intake hoses and passages for visible damage or blockage, where applicable.
- Compare scan-tool MAP readings with expected values and other available data using the vehicle-specific procedure.
- Test the circuit and sensor as directed by service information before deciding what needs repair.
How to fix P0106
Repair or replace parts only after testing identifies the cause. Depending on the findings, the remedy could involve a connector, wiring, an intake-related issue, or the sensor. Avoid replacing the MAP sensor based on the code alone; consult a qualified technician if diagnosis or testing is beyond your experience.
Can I drive with P0106?
P0106 does not establish whether a vehicle is safe to drive. If the engine runs poorly, loses power, stalls, or shows other serious symptoms, stop somewhere safe and seek professional advice. Otherwise, arrange diagnosis promptly and follow the vehicle’s owner’s manual.
P0106 frequently asked questions
Does P0106 mean the MAP sensor is bad?
No. It indicates a MAP or barometric pressure sensor circuit range/performance issue, but testing is needed to identify the cause.
Can I keep driving with P0106?
The code alone cannot determine that. Consider how the vehicle is running, follow the owner’s manual, and seek prompt diagnosis if there is poor running, stalling, or loss of power.
What should be checked first for P0106?
Record related codes and freeze-frame data, then use vehicle-specific service information to inspect the connector, wiring, relevant intake paths, and sensor readings.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.