Source-backed diagnostic reference

P0107 Code: Meaning & Diagnostic Guide

Manifold Absolute Pressure/Barometric Pressure Sensor Circuit Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0107 mean?

  • GENERIC: Manifold Absolute Pressure/Barometric Pressure Sensor Circuit Low Source
  • GENERIC: Manifold Absolute Pressure Sensor Low Input Source

P0107 quick answer

P0107 is a generic powertrain code for a low input from the Manifold Absolute Pressure (MAP) or barometric pressure sensor circuit. It indicates that the signal is below the expected range; it does not, by itself, confirm which component has failed.

Is P0107 generic or manufacturer-specific?

P0107 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0107 works in the vehicle

The MAP sensor measures pressure in the intake manifold, while a barometric pressure sensor measures atmospheric pressure. The vehicle’s control system uses these readings to help manage engine operation. “Low input” means the circuit signal is lower than expected. The exact test limits and diagnostic procedure depend on the vehicle.

P0107 symptoms

Depending on the vehicle and the underlying issue, P0107 may occur with a warning light, rough running, reduced performance, or difficulty starting. Some vehicles may show few noticeable symptoms.

Possible causes of P0107

Possible causes include a faulty MAP or barometric pressure sensor, a damaged or loose connector or wire, or an issue with the circuit’s power or ground. These are possibilities, not confirmed failures; the code alone does not identify the cause.

How to diagnose P0107

  1. Use a scan tool to confirm P0107 and check for other stored codes and relevant freeze-frame data.
  2. Consult vehicle-specific service information for the correct circuit description, expected readings, and test procedure.
  3. With the engine off, visually check the relevant sensor connector and accessible wiring for looseness or visible damage.
  4. Compare scan-tool pressure readings with vehicle-specific specifications and other available pressure readings under the conditions described in the service procedure.
  5. If the cause remains unclear, have a qualified technician test the sensor circuit and its connections before replacing parts.

How to fix P0107

Repair or replace only the component or wiring fault confirmed by diagnosis. A P0107 code alone is not enough to justify replacing a sensor. Clear the code after repairs and verify whether it returns using the vehicle-specific procedure.

Can I drive with P0107?

Driving impact can vary. If the vehicle runs poorly, loses power, stalls, or is difficult to control, stop when safe and arrange professional assistance. If it runs normally, seek diagnosis promptly and follow the vehicle’s owner’s manual.

P0107 frequently asked questions

What does P0107 mean?

It indicates a low input from the MAP or barometric pressure sensor circuit. It does not identify a confirmed failed part.

Does P0107 always mean the MAP sensor is bad?

No. Wiring, connectors, circuit power or ground, and the sensor itself may need to be checked before identifying the cause.

Can I diagnose P0107 from the code alone?

No. Use vehicle-specific service information and test results to determine why the circuit signal is low.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.