Source-backed diagnostic reference

P0108 Code: Meaning & Diagnostic Guide

Manifold Absolute Pressure/Barometric Pressure Sensor Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0108 mean?

  • GENERIC: Manifold Absolute Pressure/Barometric Pressure Sensor Circuit High Source
  • GENERIC: Manifold Absolute Pressure Sensor High Input Source

P0108 quick answer

P0108 is a generic powertrain code for a high input from the Manifold Absolute Pressure (MAP) or barometric-pressure sensor circuit. It indicates that the reported signal is higher than expected; it does not, by itself, identify a failed part.

Is P0108 generic or manufacturer-specific?

P0108 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0108 works in the vehicle

The engine control module monitors pressure-sensor signals to help determine engine load and operating conditions. With P0108, the MAP/barometric-pressure circuit reading is above the expected range. The exact monitoring conditions and specifications can vary by vehicle.

P0108 symptoms

Depending on the vehicle and the underlying cause, possible signs include a check-engine light, rough running, hard starting, reduced performance, or changes in fuel use. Some vehicles may show few noticeable symptoms.

Possible causes of P0108

Possible causes include a sensor signal that is genuinely out of range, a wiring or connector problem, or another issue affecting the circuit. The code alone does not confirm which cause is present or that the sensor itself has failed.

How to diagnose P0108

  1. Record P0108 and any other stored codes, along with freeze-frame data, before clearing codes.
  2. Use vehicle-specific service information to check the sensor location, circuit details, and expected readings.
  3. Inspect accessible wiring and connectors for damage, corrosion, loose connections, or other visible problems.
  4. Compare scan-tool data with vehicle specifications and test the circuit using the procedure and equipment specified for that vehicle.
  5. Confirm the cause before replacing a sensor or repairing wiring, then verify whether the code returns.

How to fix P0108

The repair depends on the test results. It may involve addressing a connector or wiring fault, or replacing a sensor if testing confirms it is defective. Follow vehicle-specific service information; P0108 alone is not enough to select a repair.

Can I drive with P0108?

Driving impact can vary. If the vehicle runs normally, arrange diagnosis soon and monitor for changes. If it runs poorly, loses power, stalls, or otherwise feels unsafe to control, avoid continuing to drive and seek professional assistance.

P0108 frequently asked questions

What does P0108 mean?

P0108 means the MAP or barometric-pressure sensor circuit has a high input compared with the expected range.

Does P0108 mean the MAP sensor is bad?

No. The code identifies a high circuit signal, not a confirmed failed sensor. Wiring, connectors, and other circuit conditions may also need checking.

Can I keep driving with P0108?

It depends on how the vehicle behaves. Have the code diagnosed, and avoid driving if the vehicle runs poorly, loses power, stalls, or feels unsafe.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.