Source-backed diagnostic reference

P0112 Code: Meaning & Diagnostic Guide

Intake Air Temperature Sensor 1 Circuit Low Bank 1

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0112 mean?

  • GENERIC: Intake Air Temperature Sensor 1 Circuit Low Bank 1 Source
  • GENERIC: Intake Air Temperature Sensor Low Input Source

P0112 quick answer

P0112 is a generic powertrain code indicating a low electrical input from Intake Air Temperature Sensor 1 circuit on Bank 1. It identifies a circuit reading, not a confirmed failed part.

Is P0112 generic or manufacturer-specific?

P0112 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0112 works in the vehicle

The engine computer monitors an electrical signal related to intake-air temperature. “Low input” means the signal is below the expected range; it does not necessarily mean the intake air itself is unusually cold. Bank 1 refers to the engine bank containing cylinder 1.

P0112 symptoms

Possible symptoms include a warning light, hard starting, rough running, or reduced fuel economy, but some vehicles may show few noticeable changes. The evidence does not establish which symptoms will occur.

Possible causes of P0112

Possible causes include a sensor or wiring problem, a poor electrical connection, or another circuit fault. The code alone does not confirm a cause or identify a failed component.

How to diagnose P0112

  1. Record P0112 and any other stored codes and freeze-frame details before clearing codes.
  2. With the engine off, visually inspect the intake-air temperature sensor connector and accessible wiring for looseness or visible damage.
  3. Compare live intake-air temperature data with ambient temperature when the engine is cold; a large difference may help guide further checks.
  4. Use vehicle-specific service information and appropriate electrical tests to locate the fault; consult a qualified technician if needed.

How to fix P0112

Repair should follow the test results. Depending on the confirmed fault, this may involve correcting a connection or wiring issue, or replacing a component only if testing shows it has failed. Clear the code afterward and verify whether it returns.

Can I drive with P0112?

Driving risk cannot be determined from this code alone. If the vehicle runs normally, arrange diagnosis soon and watch for changes. If it runs poorly, stalls, or shows other serious warnings, stop somewhere safe and seek professional advice.

P0112 frequently asked questions

Does P0112 prove the intake air temperature sensor is bad?

No. It reports a low circuit input; the sensor, its wiring, connection, or another circuit issue may need investigation.

Does “low input” mean the air is too cold?

Not necessarily. The phrase describes the electrical signal being below its expected range, not a confirmed air temperature.

Can I clear P0112 without repairing anything?

Clearing the code does not diagnose or repair the fault. If the underlying issue remains, the code may return.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.