Source-backed diagnostic reference

P0113 Code: Meaning & Diagnostic Guide

Intake Air Temperature Sensor 1 Circuit High Bank 1

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0113 mean?

  • AUDI: Defective Intake Air Temperature Sensor, Dirty air filter, Defective Mass Air Flow Sensor, Faulty or corroded Intake Air Temperature Sensor wiring or connections Source
  • GENERIC: Intake Air Temperature Sensor 1 Circuit High Bank 1 Source
  • GENERIC: Intake Air Temperature Sensor High Input Source

P0113 quick answer

P0113 is a generic powertrain code for a high input from the intake air temperature (IAT) sensor circuit. It means the vehicle’s computer is receiving a signal that is higher than expected; it does not by itself confirm which part has failed.

Is P0113 generic or manufacturer-specific?

P0113 has a generic source-backed definition in this database, with additional manufacturer-labelled references for AUDI. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0113 works in the vehicle

The IAT sensor measures the temperature of air entering the engine. “High input” describes the electrical signal seen by the computer, not necessarily a high air temperature. The cause needs to be diagnosed on the specific vehicle.

P0113 symptoms

Some vehicles may show a check-engine light or changes in engine performance or fuel use, while others may have no obvious symptoms. The code alone does not establish that any of these symptoms are present.

Possible causes of P0113

Possibilities include a problem with the IAT sensor or its wiring or connections. One manufacturer-specific reference also lists a dirty air filter or a faulty mass airflow sensor; these are possibilities, not confirmed causes for every vehicle with P0113.

How to diagnose P0113

  1. Record P0113 and any other stored codes and freeze-frame data before clearing codes.
  2. Check the vehicle’s service information for the correct sensor location and diagnostic procedure.
  3. Inspect the relevant wiring and connectors for visible damage, looseness, or corrosion.
  4. Compare the scan-tool IAT reading with ambient conditions when the engine is cold; an implausible reading needs further testing.
  5. Have a qualified technician test the sensor circuit and related components to identify the cause before replacing parts.

How to fix P0113

Repair or replace only the component confirmed faulty by testing. Depending on the vehicle and diagnosis, this may involve correcting a wiring or connector problem or replacing a sensor. Follow vehicle-specific service information; the code alone is not a reason to replace the sensor, air filter, or mass airflow sensor.

Can I drive with P0113?

P0113 alone does not establish whether the vehicle is safe to drive. If the vehicle runs poorly, displays additional warnings, or behaves unusually, limit driving and arrange an inspection. Follow the owner’s manual and seek prompt help if drivability worsens.

P0113 frequently asked questions

Does P0113 mean the IAT sensor is defective?

No. It identifies a high input in the IAT sensor circuit, but the sensor, wiring, connections, or another related issue may need to be checked.

Does “high input” mean the intake air is hot?

Not necessarily. “High input” refers to the electrical signal received by the vehicle’s computer, not a direct confirmation of air temperature.

Can I clear P0113 and keep driving?

Clearing the code does not fix its cause. Driving guidance depends on symptoms and the vehicle; consult the owner’s manual and arrange diagnosis if the code returns or the vehicle behaves unusually.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.