Source-backed diagnostic reference

P0144 Code: Meaning & Diagnostic Guide

O2 Sensor Circuit High Voltage Bank 1 Sensor 3

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0144 mean?

  • GENERIC: O2 Sensor Circuit High Voltage Bank 1 Sensor 3 Source
  • GENERIC: O2 Sensor Circuit Low Voltage (Bank 1 Sensor 3) Source

P0144 quick answer

P0144 is listed in the supplied generic references as an oxygen-sensor circuit fault for Bank 1 Sensor 3, but the references conflict: one says high voltage and the other says low voltage. Confirm the definition for the specific vehicle before diagnosing.

Is P0144 generic or manufacturer-specific?

P0144 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0144 works in the vehicle

An oxygen-sensor circuit code concerns the electrical signal from a sensor and its circuit. “Bank 1” identifies the engine bank containing cylinder 1; the sensor’s exact position and meaning of “Sensor 3” depend on the vehicle. The supplied references do not agree on whether P0144 indicates a high- or low-voltage signal.

P0144 symptoms

The evidence supplied does not establish any symptoms. Depending on the vehicle and fault, an illuminated check-engine light or changes in engine performance or fuel use may occur, but none is confirmed for this code here.

Possible causes of P0144

No cause is confirmed by the references. If the vehicle’s service information confirms a sensor-circuit voltage fault, possible areas to investigate include the sensor, its wiring or connectors, and related circuit connections.

How to diagnose P0144

  1. Record the vehicle’s make, model, year, engine, and any other stored codes.
  2. Check vehicle-specific service information or a reliable scan-tool description to resolve the high-versus-low voltage discrepancy.
  3. Review freeze-frame data and relevant live sensor readings, if available.
  4. With the vehicle’s service procedure, inspect the sensor wiring and connectors for visible damage, looseness, or corrosion.
  5. Test the sensor and circuit using the vehicle-specific diagnostic procedure; do not replace a part based on the code alone.

How to fix P0144

Choose a repair only after confirming the code definition and test results for the specific vehicle. The supplied evidence does not identify a failed component or prescribe a repair.

Can I drive with P0144?

The supplied evidence does not establish whether driving is safe or unsafe. Follow the vehicle manual and seek professional advice if drivability changes, warning lights worsen, or you are unsure whether to continue.

P0144 frequently asked questions

What does P0144 mean?

The supplied generic references describe an oxygen-sensor circuit fault at Bank 1 Sensor 3, but disagree about whether the signal is high or low voltage. Verify the vehicle-specific definition.

Does P0144 prove the oxygen sensor has failed?

No. The code descriptions alone do not confirm a failed sensor; the circuit and vehicle-specific diagnostic results should be checked.

Can I drive with P0144?

The evidence provided does not establish a universal drive recommendation. Consider vehicle behavior and the manufacturer’s guidance, and get professional advice if uncertain.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.