Source-backed diagnostic reference

P023B Code: Meaning & Diagnostic Guide

Charge Air Cooler Coolant Pump A Control Circuit Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P023B mean?

  • GENERIC: Charge Air Cooler Coolant Pump A Control Circuit Low Source
  • GENERIC: Charge Air Cooler Coolant Pump A Control Circuit Low Source

P023B quick answer

P023B is a generic diagnostic trouble code meaning “Charge Air Cooler Coolant Pump A Control Circuit Low.” It indicates that the engine computer detected a low electrical signal in the pump’s control circuit; it does not by itself confirm which part has failed.

Is P023B generic or manufacturer-specific?

P023B has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P023B works in the vehicle

The charge air cooler helps cool compressed intake air. In systems that use a coolant pump for this purpose, the code points to a low reading in the control circuit for pump A. “Circuit low” describes the detected electrical signal, not necessarily a confirmed pump failure. System design and diagnostic details can vary by vehicle.

P023B symptoms

Possible symptoms include a warning light, reduced engine performance, or no noticeable change. Symptoms depend on the vehicle and whether the charge air cooling system is affected.

Possible causes of P023B

Possible causes include a wiring or connector problem, a control-circuit issue, a pump problem, or another fault in the related system. The code alone does not identify the cause.

How to diagnose P023B

  1. Record the code and check for other stored codes and relevant freeze-frame information.
  2. Use vehicle-specific service information to confirm how the charge air cooler pump circuit is configured.
  3. Have a qualified technician inspect the pump’s wiring and connectors for visible damage, corrosion, or loose connections.
  4. Follow the vehicle-specific diagnostic procedure to test the control circuit and pump before replacing parts.

How to fix P023B

Repair decisions should follow diagnosis rather than the code alone. A qualified technician can determine whether wiring, connectors, the pump, or another circuit component needs attention. Avoid replacing the pump solely because P023B is stored.

Can I drive with P023B?

Driving impact cannot be determined from P023B alone. If the vehicle loses power, runs abnormally, or displays additional warnings, stop when it is safe and seek qualified assistance. Consult the vehicle’s manual or a technician for advice specific to the vehicle.

P023B frequently asked questions

What does P023B mean?

It means the engine computer detected a low electrical signal in the Charge Air Cooler Coolant Pump A control circuit.

Does P023B prove the coolant pump has failed?

No. The code identifies a circuit reading, not a confirmed failed component. Diagnosis is needed to find the cause.

Can I keep driving with P023B?

The code alone does not establish whether driving is safe or how severe the problem is. Consider symptoms and warning messages, and seek vehicle-specific guidance from a qualified technician.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.