Source-backed diagnostic reference

P023C Code: Meaning & Diagnostic Guide

Charge Air Cooler Coolant Pump A Control Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P023C mean?

  • GENERIC: Charge Air Cooler Coolant Pump A Control Circuit High Source
  • GENERIC: Charge Air Cooler Coolant Pump A Control Circuit High Source

P023C quick answer

P023C is a generic powertrain code meaning “Charge Air Cooler Coolant Pump A Control Circuit High.” It indicates that the control circuit’s signal or voltage was detected above the expected range; it does not, by itself, confirm a failed pump.

Is P023C generic or manufacturer-specific?

P023C has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P023C works in the vehicle

The charge air cooler helps reduce the temperature of air entering the engine. On systems that use a coolant pump for this cooler, the code points to an electrical control-circuit reading that is too high. “A” identifies the circuit designation, which can vary by vehicle.

P023C symptoms

Possible symptoms depend on the vehicle and system. The code may appear with a warning light, reduced engine performance, or no obvious symptom. The supplied evidence does not establish any particular symptom.

Possible causes of P023C

Possible explanations include a wiring or connector problem, an issue in the pump control circuit, or a pump-related electrical fault. The code alone does not identify the cause or confirm that the pump has failed.

How to diagnose P023C

  1. Check for other stored codes and note when the code was set.
  2. Use vehicle-specific service information to identify the charge air cooler pump circuit and its expected test values.
  3. With the vehicle safely powered down as directed by its service information, inspect accessible wiring and connectors for damage, corrosion, or looseness.
  4. Have a qualified technician test the circuit and pump using the manufacturer’s diagnostic procedure before replacing parts.

How to fix P023C

Repair depends on the test results. Address verified wiring or connector faults, or replace a component only if testing identifies it as faulty. Use vehicle-specific service information or a qualified technician; do not assume the pump needs replacement from P023C alone.

Can I drive with P023C?

The code by itself does not establish whether the vehicle is safe to drive. Check the owner’s manual and warning messages. If performance is reduced, the engine overheats, or other serious symptoms occur, stop driving when safe and seek professional help.

P023C frequently asked questions

Does P023C mean the charge air cooler coolant pump has failed?

No. It identifies a high reading in the pump control circuit, but further testing is needed to determine the cause.

What does “circuit high” mean?

It means the vehicle detected a circuit signal or voltage above its expected range. It does not name the failed part.

Can I clear P023C without diagnosing it?

Clearing the code does not fix the underlying issue. Record the code and have the circuit checked if it returns or symptoms are present.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.