Source-backed diagnostic reference

P0241 Code: Meaning & Diagnostic Guide

Turbocharger/Supercharger Boost Sensor B Circuit Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0241 mean?

  • GENERIC: Turbocharger/Supercharger Boost Sensor B Circuit Low Source
  • GENERIC: Turbocharger/Supercharger Boost Sensor B Circuit Low Source

P0241 quick answer

P0241 means the engine computer has detected a low electrical signal in the Turbocharger/Supercharger Boost Sensor B circuit. It identifies a circuit reading, not a confirmed failed part.

Is P0241 generic or manufacturer-specific?

P0241 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0241 works in the vehicle

The boost sensor measures pressure in the turbocharger or supercharger system and sends a signal to the engine computer. “Circuit low” means the signal is below the expected range; the cause may be the sensor, its wiring or connector, or another circuit issue.

P0241 symptoms

Depending on the vehicle and the underlying issue, possible signs may include reduced engine power, changes in turbo or supercharger performance, or an illuminated check-engine light. Some vehicles may show no obvious symptoms.

Possible causes of P0241

Possible explanations include a faulty boost sensor, damaged or corroded wiring or connectors, or a problem elsewhere in the sensor circuit. The code alone does not establish which, if any, component has failed.

How to diagnose P0241

  1. Confirm the code with a scan tool and check for other stored codes and available freeze-frame information.
  2. Use vehicle-specific service information to identify Boost Sensor B and its expected readings.
  3. With the engine off, visually inspect the sensor connector and accessible wiring for looseness, damage, or corrosion.
  4. Compare scan-tool sensor readings with manufacturer specifications and test the circuit using the specified procedure.
  5. Repair or replace a component only after testing identifies the cause, then clear the code and verify whether it returns.

How to fix P0241

The appropriate repair depends on diagnosis. It may involve correcting a wiring or connector issue or replacing a sensor if testing confirms it is faulty. Follow vehicle-specific service information or consult a qualified technician.

Can I drive with P0241?

Driving impact can vary. If the vehicle has reduced power, runs poorly, or shows other concerning symptoms, avoid demanding driving and arrange an inspection. If it behaves normally, have the code checked promptly and follow the vehicle owner's guidance.

P0241 frequently asked questions

Does P0241 confirm the boost sensor has failed?

No. It indicates a low signal in the Boost Sensor B circuit, but testing is needed to identify the cause.

What does “circuit low” mean?

It means the engine computer is receiving a sensor signal below its expected range.

Can I diagnose P0241 from the code alone?

No. Check other codes, inspect the accessible wiring and connector, and compare sensor and circuit readings with vehicle-specific specifications.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.