Source-backed diagnostic reference

P0248 Code: Meaning & Diagnostic Guide

Turbocharger/Supercharger Wastegate Actuator B Range/Performance

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0248 mean?

  • GENERIC: Turbocharger/Supercharger Wastegate Actuator B Range/Performance Source
  • GENERIC: Turbocharger Wastegate Solenoid B High Source

P0248 quick answer

P0248 is a generic powertrain code associated with Turbocharger/Supercharger Wastegate Actuator B range or performance. Some code references describe it as Turbocharger Wastegate Solenoid B High, so the exact meaning can depend on the vehicle and diagnostic system.

Is P0248 generic or manufacturer-specific?

P0248 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0248 works in the vehicle

A wastegate actuator or solenoid helps control boost pressure in a turbocharger or supercharger system. “Range/performance” means the reported operation may be outside an expected range; “high” may refer to an electrical signal or circuit reading. P0248 alone does not identify a failed part.

P0248 symptoms

Depending on the vehicle and underlying issue, possible context may include reduced engine power, unusual boost behavior, a warning light, or no noticeable symptoms. These are not confirmed by the code alone.

Possible causes of P0248

Possible areas to investigate include the wastegate actuator or solenoid, its wiring and connectors, related hoses or mechanical linkage, or a control-system issue. The supplied code evidence does not establish a specific cause.

How to diagnose P0248

  1. Confirm P0248 with a compatible scan tool and record any other codes and available freeze-frame data.
  2. Check the vehicle-specific service information to confirm how P0248 is defined for that vehicle.
  3. Inspect accessible actuator or solenoid wiring, connectors, hoses, and linkage for visible damage, looseness, or disconnection.
  4. Have a qualified technician test the relevant circuit and actuator using the vehicle manufacturer's diagnostic procedure.
  5. Recheck for codes after any verified issue is addressed; avoid replacing parts based on the code alone.

How to fix P0248

The repair depends on diagnosis. It may involve correcting a connection, wiring, hose, or linkage issue, or servicing a confirmed faulty component. Use vehicle-specific service information or a qualified technician; P0248 by itself does not confirm which repair is needed.

Can I drive with P0248?

The code alone cannot determine whether continued driving is safe. If the vehicle has major power loss, abnormal engine behavior, or warning lights, stop when safe and seek professional advice. If there are no noticeable symptoms, arrange diagnosis promptly and follow the vehicle manual.

P0248 frequently asked questions

Does P0248 mean the wastegate actuator has failed?

No. It points to a wastegate actuator or solenoid range/performance concern in generic references, but diagnosis is needed to identify the cause.

Why do references describe P0248 differently?

The supplied generic references use both “Wastegate Actuator B Range/Performance” and “Wastegate Solenoid B High.” Check vehicle-specific service information for the applicable interpretation.

Can I diagnose P0248 from symptoms alone?

No. Symptoms can provide context, but a scan, inspection, and vehicle-specific tests are needed to narrow down the cause.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.