Source-backed diagnostic reference

P0255 Code: Meaning & Diagnostic Guide

Injection Pump Fuel Metering Control A Intermittent (Cam/Rotor/Injector)

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0255 mean?

  • GENERIC: Injection Pump Fuel Metering Control A Intermittent (Cam/Rotor/Injector) Source
  • GENERIC: Injection Pump Fuel Metering Control A Intermittent (Cam/Rotor/Injector) Source

P0255 quick answer

P0255 is a generic powertrain code meaning “Injection Pump Fuel Metering Control A Intermittent (Cam/Rotor/Injector).” It indicates an intermittent signal or control issue in the named fuel-metering system; by itself, it does not identify a failed part.

Is P0255 generic or manufacturer-specific?

P0255 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0255 works in the vehicle

“Intermittent” means the control or signal may come and go rather than remain consistently present. “A” is a system designation, and the code wording does not establish which component is at fault or whether the same system applies to every vehicle.

P0255 symptoms

Possible symptoms, depending on the vehicle and the underlying issue, include uneven running, reduced performance, difficulty starting, stalling, or an illuminated check-engine light. A vehicle may also show few noticeable symptoms.

Possible causes of P0255

Possible areas to investigate include an intermittent electrical connection, damaged wiring, a control or sensor issue, or a fuel-metering component concern. The code alone does not confirm any of these causes.

How to diagnose P0255

  1. Record the code and any other stored or pending codes, along with freeze-frame data if available.
  2. Check the vehicle-specific service information to confirm how P0255 is defined and which tests apply.
  3. Inspect relevant wiring and connectors for visible damage, looseness, corrosion, or poor contact.
  4. Have a qualified technician test the applicable control circuit and fuel-metering system before replacing parts.

How to fix P0255

Base repairs on vehicle-specific test results. Address any verified wiring, connection, or component fault, then clear the code and confirm whether it returns. Do not assume the injection pump or another named component has failed based on P0255 alone.

Can I drive with P0255?

Driving impact depends on symptoms and the vehicle. If it runs poorly, stalls, loses power, or is difficult to start, stop driving when safe and arrange professional assessment. If there are no noticeable symptoms, prompt diagnosis is still advisable; this code alone cannot determine whether continued driving is safe.

P0255 frequently asked questions

What does P0255 mean?

P0255 generically describes an intermittent injection-pump fuel-metering control A issue, with cam, rotor, or injector noted in the code wording.

Does P0255 confirm a bad fuel pump or injector?

No. It identifies an intermittent control-system condition, not a confirmed failed component.

Can P0255 have more than one possible cause?

Yes. Wiring, connections, controls, or fuel-metering components may need investigation, but vehicle-specific testing is needed to identify the cause.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.