P0304 Code: Meaning & Diagnostic Guide
Cylinder 4 Misfire Detected
What does P0304 mean?
- AUDI: Worn out spark plugs, ignition wires, coil(s), distributor cap and rotor (when applicable), Incorrect ignition timing, Vacuum leak(s), Low or weak fuel pressure, Improperly functioning EGR system, Defective Mass Air Flow Sensor, Defective Crankshaft and or Camshaft Sensor, Defective Throttle Position Sensor, Mechanical engine problems (i.e.—low compression, leaking head gasket(s), or valve problems) Source
- GENERIC: Cylinder 4 Misfire Detected Source
- GENERIC: Cylinder 4 Misfire Detected Source
P0304 quick answer
P0304 means the engine control system detected a misfire in cylinder 4. The code identifies where the misfire was detected, not the cause.
Is P0304 generic or manufacturer-specific?
P0304 has a generic source-backed definition in this database, with additional manufacturer-labelled references for AUDI. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P0304 works in the vehicle
A misfire occurs when a cylinder does not contribute power as expected during combustion. P0304 points to cylinder 4; the underlying issue may involve ignition, fuel delivery, air intake, engine timing, or mechanical condition.
P0304 symptoms
Possible symptoms include a rough or shaking engine, reduced power, hesitation, or a check-engine light. Some vehicles may show few noticeable symptoms. These signs do not confirm a specific cause.
Possible causes of P0304
Possibilities include worn spark plugs or ignition components, a vacuum leak, weak fuel pressure, an EGR or sensor problem, incorrect ignition timing, or an engine mechanical issue such as low compression. The code alone does not establish which, if any, is responsible.
How to diagnose P0304
- Scan for P0304 and any other stored or pending codes; note when the symptoms occur.
- Check for visible intake, wiring, or connector problems and review relevant service information for the vehicle.
- Have a qualified technician assess the cylinder 4 ignition and fuel systems, using appropriate tests rather than replacing parts based on the code alone.
- If those checks do not identify the cause, consider further diagnosis of air leaks, sensor inputs, timing, and engine mechanical condition.
How to fix P0304
Repair depends on the confirmed cause. A technician may address an ignition, fuel, air, sensor, timing, or mechanical problem, then clear the code and verify whether it returns. Avoid replacing parts solely because P0304 is present.
Can I drive with P0304?
If the engine runs roughly, loses power, or the check-engine light flashes, reduce driving and arrange prompt professional assessment; a flashing light can indicate an active misfire that may damage the emissions system. If there are no noticeable symptoms, have the code checked soon and follow the vehicle's manual.
P0304 frequently asked questions
What does P0304 mean?
It indicates that the engine control system detected a misfire in cylinder 4. It does not identify the failed part.
Does P0304 mean the spark plug is bad?
Not necessarily. A spark plug is one possibility, but ignition, fuel, air, sensor, timing, or mechanical issues can also be involved.
Can I keep driving with P0304?
It depends on how the vehicle runs. A rough-running engine, power loss, or flashing check-engine light calls for reduced driving and prompt assessment.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.