Source-backed diagnostic reference

P0308 Code: Meaning & Diagnostic Guide

Cylinder 8 Misfire Detected

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0308 mean?

  • GENERIC: Cylinder 8 Misfire Detected Source
  • GENERIC: Cylinder 8 Misfire Detected Source

P0308 quick answer

P0308 means the vehicle’s diagnostic system detected a misfire in cylinder 8. The code identifies a cylinder, but does not by itself confirm the cause or a failed part.

Is P0308 generic or manufacturer-specific?

P0308 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0308 works in the vehicle

A misfire occurs when a cylinder does not contribute power as expected. P0308 is a generic powertrain code for a misfire detected at cylinder 8; the code alone does not identify why it happened.

P0308 symptoms

Depending on the vehicle and the misfire, possible signs include a rough-running engine, shaking, reduced power, hesitation, or an illuminated or flashing check-engine light. Some vehicles may show few noticeable symptoms.

Possible causes of P0308

Possible causes can include an ignition, fuel-delivery, wiring, or engine-mechanical issue affecting cylinder 8. These are diagnostic possibilities, not confirmed causes; the code alone does not identify a failed component.

How to diagnose P0308

  1. Record P0308 and any other stored codes and available freeze-frame information before clearing codes.
  2. Note when the symptoms occur and whether the check-engine light is steady or flashing.
  3. Have a qualified technician inspect the cylinder 8 ignition, fuel-delivery, and wiring systems using vehicle-specific service information.
  4. If initial checks do not identify the issue, further testing may be needed to assess engine condition and confirm the cause.

How to fix P0308

Repair should follow the confirmed cause, not the code alone. A technician can use vehicle-specific procedures and test results to determine whether repair or replacement of a component is appropriate.

Can I drive with P0308?

If the engine runs very rough, loses power, or the check-engine light flashes, reduce driving and seek professional advice promptly. If symptoms are mild, arrange diagnosis soon; the code alone cannot establish whether continued driving is safe.

P0308 frequently asked questions

What does P0308 mean?

It means the diagnostic system detected a misfire in cylinder 8.

Does P0308 identify the part that failed?

No. It identifies where a misfire was detected, not its cause or a confirmed failed component.

Can I keep driving with P0308?

That depends on the vehicle’s symptoms and conditions. A flashing check-engine light, rough running, or power loss warrants prompt attention; have the vehicle assessed rather than relying on the code alone.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.