P0337 Code: Meaning & Diagnostic Guide
Crankshaft Position Sensor A Circuit Low
What does P0337 mean?
P0337 quick answer
P0337 is a generic powertrain code meaning the crankshaft position sensor “A” circuit has a low input. It identifies a detected circuit condition, not proof that the sensor itself has failed.
Is P0337 generic or manufacturer-specific?
P0337 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P0337 works in the vehicle
The crankshaft position sensor provides information used to determine engine speed and crankshaft position. “Circuit low” means the signal or voltage monitored by the vehicle’s control module was below its expected range. The exact circuit design and test values vary by vehicle.
P0337 symptoms
The check-engine light may be on. Depending on the vehicle and the underlying issue, possible symptoms include difficulty starting, stalling, rough running, or no-start; some vehicles may show few noticeable symptoms.
Possible causes of P0337
Possible causes include a damaged or disconnected sensor connector, wiring damage or a short, a sensor problem, an issue with the sensor’s power or ground, or a problem with the signal-producing component the sensor reads. The code alone does not identify the cause.
How to diagnose P0337
- Check for other stored codes and note when the symptoms occur.
- Look up the vehicle-specific diagnostic procedure, wiring diagram, and sensor specifications.
- With the engine off, visually inspect the sensor connector and accessible wiring for looseness, corrosion, damage, or contamination.
- Use the vehicle-specific procedure and suitable test equipment to check the circuit and sensor; compare results with the specified values.
- If the cause is not clear, have a qualified technician continue diagnosis before replacing parts.
How to fix P0337
Repair should address the confirmed cause, such as a wiring or connector issue, rather than replacing the sensor based on P0337 alone. Follow vehicle-specific service information; seek professional diagnosis if electrical testing is needed.
Can I drive with P0337?
Driving impact is vehicle- and symptom-dependent. If the engine stalls, will not start reliably, or runs poorly, avoid continued driving and arrange diagnosis. If there are no noticeable symptoms, have the code checked promptly and follow the vehicle’s manual.
P0337 frequently asked questions
Does P0337 mean the crankshaft position sensor is bad?
No. It means the sensor “A” circuit input was detected as low. Wiring, connectors, power or ground, and other circuit-related issues may also be involved.
Can P0337 cause a no-start?
It can be associated with starting problems on some vehicles, but the code alone does not confirm that it caused a no-start.
Can I keep driving with P0337?
It depends on how the vehicle behaves. Stalling or unreliable running makes continued driving inadvisable; otherwise, arrange a prompt vehicle-specific diagnosis.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.