Source-backed diagnostic reference

P0345 Code: Meaning & Diagnostic Guide

Camshaft Position Sensor A Circuit Bank 2

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0345 mean?

  • GENERIC: Camshaft Position Sensor A Circuit Bank 2 Source
  • GENERIC: Camshaft Position Sensor "A" Circuit (Bank 2) Source

P0345 quick answer

P0345 is a generic powertrain code meaning “Camshaft Position Sensor A Circuit, Bank 2.” It indicates that the engine computer detected a problem with that circuit; it does not by itself prove the sensor has failed.

Is P0345 generic or manufacturer-specific?

P0345 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0345 works in the vehicle

The camshaft position sensor provides information used to determine camshaft position and timing. “Circuit” refers to the sensor’s electrical path and signal, which can include the sensor, wiring, connectors, and related control systems. Bank 2 identifies an engine bank; the vehicle’s service information can show which side that is.

P0345 symptoms

Depending on the vehicle and the underlying issue, possible signs include a warning light, rough running, reduced performance, difficulty starting, or stalling. Some vehicles may show few noticeable symptoms.

Possible causes of P0345

Possible causes include a faulty camshaft position sensor, damaged or loose wiring or connectors, an issue affecting the sensor signal, or another engine-timing or control-system problem. The code alone does not identify the cause.

How to diagnose P0345

  1. Confirm P0345 with a scan tool and note any other codes and available freeze-frame information.
  2. Check the vehicle-specific service information to identify Bank 2 and the correct sensor and circuit.
  3. Inspect the relevant connector and wiring for looseness, damage, corrosion, or signs of contamination.
  4. Test the circuit and sensor using the manufacturer’s diagnostic procedure and suitable equipment.
  5. After any repair, clear the code if appropriate and check whether it returns under similar operating conditions.

How to fix P0345

Choose a repair only after diagnosis. Depending on the findings, this may involve repairing wiring or a connector, addressing another identified circuit issue, or replacing a confirmed faulty sensor. Follow vehicle-specific service information; P0345 alone is not a reason to replace a part.

Can I drive with P0345?

Driving impact depends on the vehicle’s symptoms and behavior. If it runs roughly, stalls, loses power, or is difficult to start, avoid continued driving and arrange an assessment. If it appears to run normally, have the code checked promptly and follow the owner’s manual.

P0345 frequently asked questions

Does P0345 mean the camshaft position sensor is bad?

No. It identifies a problem detected in the Bank 2 Sensor A circuit, which may involve the sensor, wiring, connectors, or another related issue.

What does Bank 2 mean?

Bank 2 is one side of the engine. Its location depends on the engine layout, so consult vehicle-specific service information.

Can I keep driving with P0345?

That depends on how the vehicle behaves. Stalling, rough running, or loss of power calls for avoiding continued driving and getting the vehicle assessed.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.