Source-backed diagnostic reference

P0347 Code: Meaning & Diagnostic Guide

Camshaft Position Sensor A Circuit Low Bank 2

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0347 mean?

  • GENERIC: Camshaft Position Sensor A Circuit Low Bank 2 Source
  • GENERIC: Camshaft Position Sensor A Circuit Low (Bank 2) Source

P0347 quick answer

P0347 is a generic powertrain code for a low signal in the Camshaft Position Sensor A circuit on Bank 2. It identifies a circuit reading, not a confirmed failed sensor.

Is P0347 generic or manufacturer-specific?

P0347 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0347 works in the vehicle

The engine computer detected a voltage or signal below its expected range in the circuit for camshaft position sensor A on Bank 2. Bank 2 is the side of the engine that does not contain cylinder 1; the exact sensor location depends on the vehicle.

P0347 symptoms

P0347 may occur with no obvious symptoms. Depending on the vehicle and the underlying issue, possible symptoms can include difficult starting, rough running, reduced performance, or an illuminated check-engine light. The evidence provided does not establish that any particular symptom will occur.

Possible causes of P0347

Possible causes include a wiring or connector problem, a sensor signal issue, or another fault affecting the circuit. The code alone does not confirm which cause is present or that the sensor itself has failed.

How to diagnose P0347

  1. Confirm P0347 with a scan tool and check for other stored codes and relevant freeze-frame information.
  2. Use vehicle-specific service information to identify Bank 2 and sensor A.
  3. Inspect the sensor connector and accessible wiring for looseness, damage, or corrosion.
  4. Have a qualified technician check the circuit and sensor signal using the vehicle's diagnostic specifications before replacing parts.

How to fix P0347

Repair the fault identified by testing. This may involve addressing a wiring or connector issue or replacing a component if diagnostics confirm it is faulty. Do not replace the sensor based on P0347 alone.

Can I drive with P0347?

The code alone does not determine whether the vehicle is safe or suitable to drive. Arrange diagnosis promptly; if the vehicle runs poorly, stalls, or is difficult to control, stop driving and seek professional assistance.

P0347 frequently asked questions

Does P0347 mean the camshaft position sensor is bad?

No. It indicates a low signal in the sensor circuit, but wiring, connections, or other circuit issues may also be involved.

What does Bank 2 mean?

Bank 2 is the side of the engine that does not contain cylinder 1. Its location varies by engine design.

Can I keep driving with P0347?

The code alone cannot determine drivability. Consider the vehicle's behavior and seek prompt diagnosis; stop driving if it stalls or runs in a way that makes control difficult.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.