P0348 Code: Meaning & Diagnostic Guide
Camshaft Position Sensor A Circuit High Bank 2
What does P0348 mean?
P0348 quick answer
P0348 is a generic powertrain code for a high electrical signal in the Camshaft Position Sensor A circuit on Bank 2. It identifies a circuit reading, not a confirmed failed sensor.
Is P0348 generic or manufacturer-specific?
P0348 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P0348 works in the vehicle
The camshaft position sensor reports camshaft timing to the engine control module. “Circuit high” means the module detected a signal voltage or electrical state above the expected range. Bank 2 is the side of the engine that does not contain cylinder 1; the exact sensor location depends on the vehicle.
P0348 symptoms
Depending on the vehicle and the underlying cause, symptoms may include a warning light, difficult starting, rough running, reduced performance, or no noticeable change.
Possible causes of P0348
Possible causes include a damaged or disconnected sensor connector, wiring faults, a sensor problem, or an issue with the circuit or engine control module. The code alone does not identify which, if any, component has failed.
How to diagnose P0348
- Confirm the code with a suitable scan tool and check for other stored codes and freeze-frame information.
- Use vehicle-specific service information to identify Bank 2 and the correct Sensor A circuit.
- With the ignition off, inspect the sensor connector and accessible wiring for damage, corrosion, looseness, or contamination.
- Have a qualified technician test the circuit and sensor against vehicle-specific specifications before replacing parts.
How to fix P0348
Repair any verified wiring or connector fault, or replace a component only if testing confirms it is faulty. Clear the code and recheck whether it returns after the repair.
Can I drive with P0348?
Driving impact varies. If the engine runs poorly, stalls, is difficult to start, or loses power, avoid continued driving and arrange professional assessment. If there are no symptoms, seek diagnosis soon and follow the vehicle’s manual.
P0348 frequently asked questions
Does P0348 mean the camshaft position sensor has failed?
No. It reports a high signal in the Sensor A circuit on Bank 2; wiring, connectors, or other circuit issues may also be involved.
What does Bank 2 mean?
It is the engine bank that does not contain cylinder 1. Its physical location varies by engine.
Can I keep driving with P0348?
It depends on how the vehicle behaves. Poor running, stalling, hard starting, or power loss warrant avoiding continued driving and getting the vehicle assessed.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.