P0357 Code: Meaning & Diagnostic Guide
Ignition Coil G Primary Control Circuit/Open
What does P0357 mean?
P0357 quick answer
P0357 is a generic powertrain code for an issue in the ignition coil G primary control circuit, sometimes described as a primary/secondary circuit fault. It does not by itself confirm that the coil has failed.
Is P0357 generic or manufacturer-specific?
P0357 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P0357 works in the vehicle
The primary circuit carries the control signal used to operate an ignition coil. “Open” means the circuit may be interrupted or not behaving as expected. The letter G identifies a coil designation, but its location and meaning can vary by vehicle; check vehicle-specific service information.
P0357 symptoms
Possible symptoms include a rough-running engine, misfire, reduced performance, a warning light, or no obvious change. Symptoms depend on the vehicle and the underlying issue.
Possible causes of P0357
Possibilities include a problem with the coil, its wiring or connector, the control circuit, or another related component. The code alone does not identify the failed part.
How to diagnose P0357
- Confirm P0357 with a scan tool and note any other codes and available freeze-frame information.
- Consult service information for the vehicle to identify coil G and its specified circuit checks.
- With the ignition off, inspect accessible coil connectors and wiring for looseness, damage, corrosion, or signs of wear.
- Have a qualified technician test the circuit and related components using the vehicle maker’s diagnostic procedure before replacing parts.
How to fix P0357
Repair or replace only the part shown to be faulty by testing. Depending on the findings, this could involve a connection, wiring, a coil, or another part of the control circuit. Clear the code and verify the repair according to vehicle-specific procedures.
Can I drive with P0357?
Driving impact cannot be determined from this code alone. If the engine runs roughly, loses power, or the warning light flashes, avoid continued driving and seek prompt professional advice. Otherwise, arrange diagnosis soon and follow the vehicle’s owner-manual guidance.
P0357 frequently asked questions
Does P0357 mean ignition coil G is bad?
No. It indicates a detected issue in the coil G circuit, but testing is needed to determine whether the coil, wiring, connector, or another component is responsible.
What does “open circuit” mean?
It means the expected electrical path may be interrupted or not functioning as expected. The code does not specify where the interruption is.
Can I identify coil G without vehicle information?
Not reliably. Coil designations and locations vary, so consult service information for the specific vehicle.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.