Source-backed diagnostic reference

P0364 Code: Meaning & Diagnostic Guide

DC/AC Converter Control Module Control Circuit Range/Performance

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0364 mean?

  • GENERIC: DC/AC Converter Control Module Control Circuit Range/Performance Source
  • GENERIC: DC/AC Converter Control Module Control Circuit Range/Performance Source

P0364 quick answer

P0364 is a generic powertrain diagnostic trouble code for “DC/AC Converter Control Module Control Circuit Range/Performance.” It indicates that the control circuit’s reported operation is outside an expected range or performance pattern; it does not by itself identify a failed part.

Is P0364 generic or manufacturer-specific?

P0364 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0364 works in the vehicle

“Range/performance” means the control system has detected readings or behavior that do not match its expected operating criteria. The code description alone does not specify the vehicle system details, test conditions, or which component—if any—has failed.

P0364 symptoms

There is not enough information in the supplied reference to associate P0364 with specific symptoms. Depending on the vehicle and operating conditions, a warning light or change in vehicle operation may be present, but neither is established by this code description alone.

Possible causes of P0364

The code identifies a control-circuit range/performance concern, not a confirmed cause. Possible areas for a technician to investigate may include circuit connections, wiring, related control inputs, or the converter control system, using vehicle-specific diagnostic information.

How to diagnose P0364

  1. Confirm P0364 with a suitable scan tool and record any other stored codes and available freeze-frame data.
  2. Check the vehicle’s service information for the exact code definition, test conditions, and diagnostic procedure; do not assume details from another vehicle apply.
  3. Have a qualified technician assess relevant wiring, connectors, power or ground supplies, and control-system data according to that procedure.
  4. Use test results to determine whether a circuit issue, control input, or component requires repair; clear the code and verify the repair only after addressing the identified cause.

How to fix P0364

The appropriate repair depends on vehicle-specific test results. Do not replace a converter or control module based on P0364 alone. Because converter systems may involve hazardous electrical components, leave internal or high-voltage inspection and repair to a properly qualified technician.

Can I drive with P0364?

The supplied code definition does not establish whether the vehicle is safe to drive. Follow the vehicle manual and any warning messages. If operation changes noticeably or a serious warning appears, stop in a safe place and seek professional advice; otherwise arrange diagnosis promptly.

P0364 frequently asked questions

What does P0364 mean?

It is a generic code for a DC/AC Converter Control Module Control Circuit Range/Performance concern.

Does P0364 prove that the converter or control module has failed?

No. The code describes a detected control-circuit performance concern, but does not confirm a failed component.

Can I diagnose P0364 from the code alone?

No. Diagnosis requires vehicle-specific service information and checks guided by the code’s test procedure.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.