Source-backed diagnostic reference

P0367 Code: Meaning & Diagnostic Guide

Camshaft Position Sensor B Circuit Low Bank 1

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0367 mean?

  • GENERIC: Camshaft Position Sensor B Circuit Low Bank 1 Source
  • GENERIC: Camshaft Position Sensor B Circuit Low (Bank 1) Source

P0367 quick answer

P0367 is a generic powertrain trouble code meaning “Camshaft Position Sensor B Circuit Low (Bank 1).” It indicates that the engine computer detected a low signal in that sensor circuit; it does not by itself confirm which part has failed.

Is P0367 generic or manufacturer-specific?

P0367 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0367 works in the vehicle

The camshaft position sensor provides information about camshaft position and timing. “B” identifies a sensor designation that can vary by engine, “Bank 1” refers to the side of the engine containing cylinder 1, and “circuit low” means the detected electrical signal was below the expected range. Check vehicle-specific service information to identify the sensor and test specifications.

P0367 symptoms

Some vehicles may show a check-engine light, run roughly, start poorly, or have reduced performance. Others may have few noticeable symptoms. These possibilities are not confirmed by the code alone.

Possible causes of P0367

Possible areas to investigate include the sensor, its wiring or connectors, or another issue affecting the circuit signal. P0367 alone does not establish a failed component or cause.

How to diagnose P0367

  1. Confirm P0367 with a scan tool and note any other codes and available freeze-frame data.
  2. Use vehicle-specific service information to locate the correct Sensor B and Bank 1.
  3. With the engine off, visually inspect the sensor connector and accessible wiring for looseness, damage, corrosion, or contamination.
  4. Follow the vehicle maker’s diagnostic procedure to check circuit connections and signal readings; compare results with its specifications.
  5. Repair any verified fault, then clear the code and check whether it returns.

How to fix P0367

Base repairs on test results rather than replacing the sensor based on the code alone. If diagnosis requires electrical testing or the correct sensor location is unclear, consult a qualified technician.

Can I drive with P0367?

The code alone cannot determine whether the vehicle is safe to drive. If the engine runs poorly, stalls, or loses power, avoid continued driving and arrange an inspection. If there are no noticeable symptoms, have the issue checked promptly and follow the vehicle’s manual.

P0367 frequently asked questions

What does P0367 mean?

It means the engine computer detected a low signal in the Camshaft Position Sensor B circuit on Bank 1.

Does P0367 prove the camshaft position sensor is bad?

No. The code identifies a circuit signal condition, not a confirmed failed part. Diagnosis should check the sensor and its circuit.

Can I drive with P0367?

The code alone does not establish driveability or safety. If the vehicle runs poorly, stalls, or loses power, avoid driving and seek an inspection.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.