Source-backed diagnostic reference

P0374 Code: Meaning & Diagnostic Guide

Timing Reference High Resolution Signal A No Pulses

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0374 mean?

  • GENERIC: Timing Reference High Resolution Signal A No Pulses Source
  • GENERIC: Timing Reference High Resolution Signal A No Pulses Source

P0374 quick answer

P0374 means the engine control system detected no pulses from timing reference high-resolution signal A. The code identifies a missing signal, not a confirmed failed part.

Is P0374 generic or manufacturer-specific?

P0374 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0374 works in the vehicle

A timing reference signal provides information used to track engine timing. “No pulses” means the controller did not detect the expected changes in that signal during its checks. The exact signal setup and diagnostic procedure depend on the vehicle.

P0374 symptoms

Some vehicles may show a warning light, run poorly, or have difficulty starting; others may have no obvious symptoms. These signs do not confirm P0374 as the cause.

Possible causes of P0374

Possible areas to investigate include the signal source, its wiring or connectors, or related control-system issues. The code alone does not identify which, if any, is faulty.

How to diagnose P0374

  1. Confirm P0374 and note any other stored codes and available freeze-frame information.
  2. Check vehicle-specific service information for the timing reference signal and test procedure.
  3. Inspect relevant wiring and connectors for visible damage, looseness, or corrosion.
  4. Use appropriate diagnostic equipment and vehicle specifications to check whether the signal is present.
  5. Identify the cause before replacing parts; clear the code and verify the repair according to service procedures.

How to fix P0374

Repair or replace only the item confirmed by testing to be causing the missing signal. Follow vehicle-specific service information; P0374 alone does not justify replacing a particular component.

Can I drive with P0374?

The code alone does not establish whether the vehicle is safe to drive. If it runs poorly, stalls, or is difficult to start, avoid continued driving and arrange an inspection. Otherwise, have it checked promptly and follow any vehicle warnings.

P0374 frequently asked questions

What does P0374 mean?

It indicates that the engine control system detected no pulses from timing reference high-resolution signal A.

Does P0374 identify a failed part?

No. It describes a missing signal; diagnosis is needed to find the cause.

Can I keep driving with P0374?

The code alone cannot determine that. Vehicle behavior and warnings matter; have the vehicle inspected, especially if it runs poorly or stalls.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.