P0378 Code: Meaning & Diagnostic Guide
Timing Reference High Resolution Signal B Intermittent/Erratic Pulses
What does P0378 mean?
P0378 quick answer
P0378 is a generic powertrain code meaning the timing reference high-resolution Signal B has intermittent or erratic pulses. It indicates an irregular signal, not a confirmed failed part.
Is P0378 generic or manufacturer-specific?
P0378 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P0378 works in the vehicle
A timing reference signal helps the engine control system determine timing. “High resolution” refers to a signal used for precise timing information; “intermittent/erratic pulses” means the signal is irregular or occasionally missing. Signal B is a label, and its exact implementation can vary by vehicle.
P0378 symptoms
Depending on the vehicle and whether the signal problem affects engine operation, possible signs may include rough running, stalling, hard starting, reduced performance, or an illuminated check-engine light. A stored code may also occur without obvious symptoms.
Possible causes of P0378
Possible causes can include an intermittent signal, a wiring or connection issue, electrical interference, or a problem in a related sensing or control circuit. The code alone does not identify the cause or confirm that any particular component has failed.
How to diagnose P0378
- Record the code and any other stored codes, along with the conditions present when the code was set.
- Check vehicle-specific service information to identify how Signal B is generated and monitored on that vehicle.
- Inspect the relevant accessible wiring and connectors for looseness, damage, corrosion, or poor contact.
- Use appropriate diagnostic equipment and vehicle-specific procedures to check whether the signal is intermittent or irregular.
- Confirm the cause before replacing parts, then clear the code and verify whether it returns.
How to fix P0378
The repair depends on the confirmed cause and the vehicle’s design. Address any verified wiring or connection fault, or follow the applicable diagnostic procedure for the affected circuit. Do not replace a component based on P0378 alone.
Can I drive with P0378?
Driving impact can vary. If the engine stalls, runs poorly, or loses power, avoid continued driving and arrange a safe inspection. If there are no noticeable symptoms, have the code diagnosed promptly and follow the vehicle’s manual.
P0378 frequently asked questions
Does P0378 identify a failed sensor?
No. It reports intermittent or erratic timing reference Signal B pulses, but does not by itself identify a failed sensor or other component.
What does “Signal B” mean?
It is a circuit or signal label. Its exact meaning and hardware implementation depend on the vehicle.
Can P0378 cause a vehicle to stall?
Stalling is possible if the signal irregularity affects engine operation, but the code does not establish that stalling will occur.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.