Source-backed diagnostic reference

P0387 Code: Meaning & Diagnostic Guide

Crankshaft Position Sensor B Circuit Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0387 mean?

  • GENERIC: Crankshaft Position Sensor B Circuit Low Source
  • GENERIC: Crankshaft Position Sensor B Circuit Low Source

P0387 quick answer

P0387 is a generic OBD-II code meaning “Crankshaft Position Sensor B Circuit Low.” It indicates that the engine computer detected a signal voltage below the expected range in that circuit; it does not by itself identify a failed part.

Is P0387 generic or manufacturer-specific?

P0387 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0387 works in the vehicle

The crankshaft position sensor provides information used to determine engine speed and crankshaft position. “Circuit low” describes an electrical signal reading, not necessarily a sensor failure. The meaning of Sensor B and the test procedure can vary by vehicle.

P0387 symptoms

Depending on the vehicle and the underlying issue, possible symptoms may include difficult starting, rough running, stalling, or an illuminated check-engine light. A stored code may also appear without obvious symptoms.

Possible causes of P0387

Possible causes include a problem with the Sensor B circuit, such as damaged wiring or a poor connection, or a sensor-related fault. The code alone does not confirm the cause.

How to diagnose P0387

  1. Use the vehicle’s service information to confirm how P0387 applies to that specific make, model, and engine.
  2. Scan for other codes and record relevant freeze-frame data before clearing anything.
  3. Visually check the accessible sensor wiring and connectors for damage, corrosion, or loose connections.
  4. Have the circuit and sensor tested using the vehicle maker’s specified procedure and appropriate equipment.
  5. Repair the confirmed fault, then clear the code and verify whether it returns.

How to fix P0387

Base repairs on test results rather than replacing the sensor solely because P0387 is present. Wiring, connectors, or another part of the circuit may need attention. Consult a qualified technician if diagnosis requires electrical testing or the vehicle-specific service procedure.

Can I drive with P0387?

Driving impact cannot be determined from this code alone. If the engine stalls, runs poorly, or is difficult to start, avoid continued driving and arrange an inspection. If there are no symptoms, have the code assessed promptly and follow the vehicle’s manual.

P0387 frequently asked questions

What does P0387 mean?

It is a generic code for a low electrical signal in the Crankshaft Position Sensor B circuit.

Does P0387 prove the crankshaft position sensor is bad?

No. It identifies a low circuit signal, not a confirmed failed component. Diagnosis is needed to distinguish a sensor issue from wiring or connection problems.

Can I diagnose P0387 the same way on every vehicle?

No. The meaning of Sensor B and the correct test procedure can vary, so use service information for the specific vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.