Source-backed diagnostic reference

P0389 Code: Meaning & Diagnostic Guide

Crankshaft Position Sensor B Circuit Intermittent

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0389 mean?

  • GENERIC: Crankshaft Position Sensor B Circuit Intermittent Source
  • GENERIC: Crankshaft Position Sensor B Circuit Intermittent Source

P0389 quick answer

P0389 is a generic diagnostic trouble code meaning “Crankshaft Position Sensor B Circuit Intermittent.” It indicates an intermittent signal or electrical connection in the Sensor B circuit, but does not by itself identify a failed part.

Is P0389 generic or manufacturer-specific?

P0389 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0389 works in the vehicle

The crankshaft position sensor provides information used by the engine control system to determine crankshaft position and speed. “Intermittent” means the circuit signal may be present at some times and absent or inconsistent at others. The code alone does not confirm whether the sensor, wiring, connector, or another circuit condition is responsible.

P0389 symptoms

Depending on the vehicle and the underlying issue, possible symptoms may include hard starting, stalling, rough running, or an illuminated check-engine light. Some vehicles may show few noticeable symptoms. These are possibilities, not symptoms confirmed by the code reference.

Possible causes of P0389

Possible areas to investigate include the crankshaft position sensor, its wiring or connector, and an intermittent electrical connection. P0389 does not establish which, if any, of these is faulty.

How to diagnose P0389

  1. Confirm P0389 with a scan tool and check for other stored codes and available freeze-frame data.
  2. Use vehicle-specific service information to identify Sensor B and the correct diagnostic procedure.
  3. Visually inspect the sensor wiring and connector for looseness, damage, corrosion, or signs of rubbing.
  4. Have a qualified technician test the circuit and sensor signal using the vehicle-specific procedure before replacing parts.

How to fix P0389

Repair or replacement should depend on test results and vehicle-specific service information. Do not replace the sensor solely because P0389 is present; an intermittent wiring or connection problem may also need attention.

Can I drive with P0389?

The code alone cannot determine whether the vehicle is safe to drive. If the engine stalls, runs poorly, or is difficult to start, limit driving and arrange professional diagnosis. Follow the vehicle’s warning messages and owner’s manual.

P0389 frequently asked questions

What does P0389 mean?

P0389 is a generic code for an intermittent circuit in crankshaft position sensor B.

Does P0389 prove the crankshaft position sensor has failed?

No. The code identifies an intermittent circuit condition but does not confirm a failed sensor or any other specific component.

Can wiring cause P0389?

Wiring or connector issues are possible areas to inspect, but diagnosis is needed to identify the cause.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.