Source-backed diagnostic reference

P0391 Code: Meaning & Diagnostic Guide

Camshaft Position Sensor B Circuit Range/Performance Bank 2

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0391 mean?

  • GENERIC: Camshaft Position Sensor B Circuit Range/Performance Bank 2 Source
  • GENERIC: Camshaft Position Sensor B Circuit Range/Performance (Bank 2) Source

P0391 quick answer

P0391 is a generic powertrain code for Camshaft Position Sensor B Circuit Range/Performance, Bank 2. It indicates that the signal or operation is outside the expected range; it does not by itself confirm a failed sensor.

Is P0391 generic or manufacturer-specific?

P0391 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0391 works in the vehicle

The camshaft position signal helps the engine control module determine camshaft position. “Range/performance” means the reported signal does not match what the module expects. “Bank 2” identifies an engine bank, and “Sensor B” is a designation that can vary by vehicle. Check vehicle-specific service information to identify the sensor.

P0391 symptoms

Depending on the vehicle and the underlying issue, possible symptoms may include a warning light, rough running, reduced performance, or difficulty starting. The code alone does not establish which, if any, symptoms will occur.

Possible causes of P0391

Possible areas to investigate include the sensor signal, its wiring or connector, or a condition affecting the camshaft signal. P0391 alone does not identify a failed component or establish a cause.

How to diagnose P0391

  1. Confirm the code with a suitable scan tool and note any other stored codes and available freeze-frame data.
  2. Use vehicle-specific service information to locate Sensor B and identify Bank 2; do not assume its location from the code alone.
  3. Inspect the relevant connector and accessible wiring for visible damage, looseness, or corrosion.
  4. Have a qualified technician test the signal and related circuits using the vehicle’s diagnostic procedures before replacing parts.
  5. After any verified repair, clear the code and check whether it returns under appropriate test conditions.

How to fix P0391

Base repairs on test results rather than replacing the camshaft position sensor solely because P0391 is present. Repair or replace only the component or wiring confirmed to be faulty, following vehicle-specific procedures.

Can I drive with P0391?

The code alone cannot determine whether the vehicle is safe to drive. If the engine runs poorly, stalls, or loses power, avoid driving and arrange professional assessment. If it runs normally, seek prompt diagnosis and follow the vehicle manufacturer’s guidance.

P0391 frequently asked questions

Does P0391 mean the camshaft position sensor has failed?

No. It reports a camshaft position Sensor B range/performance issue on Bank 2, but further diagnosis is needed to identify the cause.

What does “range/performance” mean?

It means the signal or operation monitored by the engine control module is outside the expected range.

Can I drive with P0391?

The code alone does not determine drivability or safety. Consider symptoms and the manufacturer’s guidance, and get the vehicle diagnosed promptly.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.