P0408 Code: Meaning & Diagnostic Guide
EGR Sensor B Circuit High
What does P0408 mean?
P0408 quick answer
P0408 generally means the exhaust gas recirculation (EGR) sensor B circuit is reading higher than expected. The supplied references conflict: one describes a high circuit and another a low circuit, so confirm the definition for the specific vehicle before diagnosing.
Is P0408 generic or manufacturer-specific?
P0408 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P0408 works in the vehicle
The EGR system routes some exhaust back into the engine to help control emissions. “Circuit high” means the control system detected an electrical signal above its expected range; it does not by itself identify a failed part. The references disagree on whether P0408 means high or low, and the exact interpretation can depend on vehicle-specific service information.
P0408 symptoms
Depending on the vehicle and the cause, the check-engine light may be on, drivability may change, or there may be no obvious symptoms. These possibilities are not confirmed by the code alone.
Possible causes of P0408
Possible causes include an electrical connection or wiring issue, a problem with the EGR sensor or related circuit, or an EGR-system issue. P0408 alone does not confirm which component, if any, has failed.
How to diagnose P0408
- Record the code and any other stored codes and freeze-frame data before clearing anything.
- Check vehicle-specific service information to confirm whether P0408 is defined as a high- or low-circuit fault for this vehicle.
- Visually inspect accessible EGR-related wiring and connectors for damage, looseness, or corrosion.
- Have a qualified technician compare sensor readings with vehicle specifications and test the circuit using the appropriate service procedure.
- Recheck for codes after repairs and confirm whether the fault returns.
How to fix P0408
Repair should follow the test results and vehicle-specific service information. Correcting a wiring or connector problem may be appropriate if testing identifies one; replacing an EGR sensor or other part should not be based on P0408 alone.
Can I drive with P0408?
The code alone does not establish whether the vehicle is safe to drive. If it runs normally, arrange diagnosis soon and follow the vehicle manual. Stop in a safe place and seek assistance if you notice severe running problems, stalling, or other concerning symptoms.
P0408 frequently asked questions
What does P0408 mean?
It generally indicates an EGR sensor B circuit reading that is too high, but the supplied references conflict, so verify the definition for the specific vehicle.
Does P0408 mean the EGR sensor has failed?
No. The code identifies a circuit reading, not a confirmed failed component. Wiring, connectors, or another EGR-system issue may also need investigation.
Can I keep driving with P0408?
The code alone cannot determine whether continued driving is safe. Consider the vehicle’s behavior, consult its manual, and seek diagnosis; stop if severe symptoms occur.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.