Source-backed diagnostic reference

P0572 Code: Meaning & Diagnostic Guide

Brake Switch A Circuit Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0572 mean?

  • GENERIC: Brake Switch A Circuit Low Source
  • GENERIC: Cruise Control/Brake Switch B Circuit Low Source

P0572 quick answer

P0572 is a generic powertrain code for a low signal in a brake-switch circuit. Reference descriptions vary: one calls it “Brake Switch A Circuit Low,” while another calls it “Cruise Control/Brake Switch B Circuit Low.” The code alone does not identify a confirmed failed part.

Is P0572 generic or manufacturer-specific?

P0572 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0572 works in the vehicle

“Circuit low” means the vehicle’s control system detected a signal voltage lower than expected in the monitored brake-switch circuit. The exact circuit label and diagnostic details can vary by vehicle.

P0572 symptoms

Possible symptoms include cruise control not working or behaving unexpectedly, brake lights that do not operate normally, or a warning light. Some vehicles may show no obvious symptoms. These are possibilities, not symptoms established by the code alone.

Possible causes of P0572

Possible causes include a misadjusted or faulty brake switch, damaged wiring or connectors, a blown fuse, or a problem elsewhere in the monitored circuit. Diagnosis is needed before identifying a cause.

How to diagnose P0572

  1. Check the owner’s manual and vehicle-specific service information for the exact P0572 definition and circuit.
  2. Note any warning lights, stored codes, and whether cruise control or brake lights behave abnormally.
  3. With the vehicle safely stationary, check whether the brake lights operate consistently when the pedal is pressed and released.
  4. Have a qualified technician inspect the relevant fuse, brake-switch adjustment, connectors, and wiring, then test the circuit using vehicle-specific procedures.
  5. Clear the code only after any identified issue is addressed, and confirm whether it returns.

How to fix P0572

The repair depends on test results. A switch adjustment or replacement, wiring or connector repair, or fuse replacement may be appropriate if confirmed by diagnosis. Do not replace parts based only on the code; use vehicle-specific service information or consult a qualified technician.

Can I drive with P0572?

Because brake-light or cruise-control operation may be affected, verify that the brake lights work before driving. If they do not, or braking behavior seems abnormal, avoid driving and arrange professional assistance. If operation appears normal, seek diagnosis promptly and use caution; the code alone cannot establish that driving is safe.

P0572 frequently asked questions

What does P0572 mean?

It indicates a low signal in a monitored brake-switch circuit. Generic references differ on whether the circuit is labeled A or B.

Does P0572 prove the brake switch has failed?

No. The code identifies a circuit signal condition, not a confirmed failed component. Wiring, connectors, a fuse, switch adjustment, or other circuit issues may need investigation.

Can P0572 affect cruise control?

It may, depending on the vehicle and the circuit involved. The code by itself does not confirm a particular symptom.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.