Source-backed diagnostic reference

P0593 Code: Meaning & Diagnostic Guide

Cruise Control Multi-Function Input B Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0593 mean?

  • GENERIC: Cruise Control Multi-Function Input B Circuit High Source
  • GENERIC: Cruise Control Multi-Function Input B Circuit High Source

P0593 quick answer

P0593 is a generic diagnostic trouble code meaning “Cruise Control Multi-Function Input B Circuit High.” It indicates that the relevant input signal is higher than expected; the code alone does not identify a failed part.

Is P0593 generic or manufacturer-specific?

P0593 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0593 works in the vehicle

The powertrain control system has detected a high electrical signal in the cruise-control multi-function input B circuit. “Circuit high” describes the signal reading, not necessarily its cause. The precise circuit and test values can vary by vehicle.

P0593 symptoms

Depending on the vehicle, cruise control may not engage, may behave inconsistently, or there may be no noticeable symptom beyond the warning or stored code. These are possibilities, not guaranteed effects of P0593.

Possible causes of P0593

Possible areas to investigate include the cruise-control input or switch, its wiring and connectors, or related control circuitry. P0593 by itself does not confirm any of these as the cause.

How to diagnose P0593

  1. Confirm the code with a suitable scan tool and note any other stored codes and available freeze-frame information.
  2. Check the vehicle’s service information for the specific meaning, circuit location, and test procedure for P0593.
  3. Inspect accessible cruise-control input wiring and connectors for visible damage, looseness, or corrosion.
  4. Have a qualified technician test the circuit against vehicle-specific specifications before replacing parts.

How to fix P0593

Address the cause identified by vehicle-specific testing. Repairing a wiring or connector issue may be appropriate if confirmed; replace a switch or other component only when testing supports it. Clear the code after repair and verify whether it returns. Avoid guesswork and follow the vehicle manufacturer’s service procedures.

Can I drive with P0593?

If cruise control is unavailable or unreliable, do not depend on it; control speed manually. If other warning lights, drivability problems, or abnormal behavior occur, consult the owner’s manual and arrange professional diagnosis.

P0593 frequently asked questions

What does P0593 mean?

P0593 means “Cruise Control Multi-Function Input B Circuit High.” It reports a higher-than-expected signal in that input circuit.

Does P0593 prove the cruise-control switch has failed?

No. The code identifies a circuit condition, not a confirmed failed component. Vehicle-specific testing is needed.

Can I drive with P0593?

The code alone does not establish whether a vehicle is safe or unsafe to drive. If cruise control is unreliable, do not rely on it, and follow the owner’s manual or seek professional advice if other problems occur.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.