P0604 Code: Meaning & Diagnostic Guide
Internal Control Module Random Access Memory (RAM) Error
What does P0604 mean?
P0604 quick answer
P0604 is a generic diagnostic trouble code for an internal control module Random Access Memory (RAM) error. It indicates that a control module reported a problem with its temporary working memory; it does not by itself confirm which part has failed.
Is P0604 generic or manufacturer-specific?
P0604 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P0604 works in the vehicle
RAM is short-term memory a control module uses while operating. P0604 describes a reported memory error, but the code alone does not identify the cause or confirm that the module needs replacement.
P0604 symptoms
Symptoms vary by vehicle and may be absent. A warning light or drivability issue could occur, but neither is guaranteed by this code.
Possible causes of P0604
Possibilities to investigate include a temporary electrical or communication issue, a problem with module power or connections, or an internal module fault. The code alone does not establish any of these causes.
How to diagnose P0604
- Use a suitable scan tool to confirm P0604 and check for other stored codes.
- Save available freeze-frame or scan data before clearing codes.
- Following vehicle-specific service information, check battery condition and charging system operation.
- Inspect relevant module power, ground, wiring, and connectors for visible damage or poor connections.
- Clear the code only after recording the data, then see whether it returns under appropriate test conditions.
- If the code returns, have a qualified technician follow the vehicle-specific diagnostic procedure before considering module programming or replacement.
How to fix P0604
Address the cause confirmed by testing. Do not replace a control module based on P0604 alone; module repair or replacement may require vehicle-specific programming and setup.
Can I drive with P0604?
The code alone does not determine whether a vehicle is safe to drive. If it runs normally, arrange prompt diagnosis and monitor for changes. If it stalls, loses power, will not start, or behaves unpredictably, stop driving when safe and seek professional help.
P0604 frequently asked questions
Does P0604 mean the control module has failed?
No. It reports an internal RAM error, but further testing is needed to determine whether the module itself or another issue is responsible.
Can P0604 be caused by a low battery?
An electrical supply problem is one possibility to check, but the code does not confirm that a low battery caused it.
Will clearing P0604 fix the problem?
Clearing the code may remove the warning temporarily, but it does not repair an underlying cause. Check whether it returns after diagnosis.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.