Source-backed diagnostic reference

P0671 Code: Meaning & Diagnostic Guide

Cylinder 1 Glow Plug Circuit/Open

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0671 mean?

  • GENERIC: Cylinder 1 Glow Plug Circuit/Open Source
  • GENERIC: Cylinder 1 Glow Plug Circuit Source

P0671 quick answer

P0671 is a generic powertrain code meaning the cylinder 1 glow plug circuit is open or has an electrical interruption. The code identifies a circuit issue, not a confirmed failed part.

Is P0671 generic or manufacturer-specific?

P0671 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0671 works in the vehicle

A glow plug helps a diesel engine start in cold conditions. “Open circuit” means the electrical path is interrupted or the control system detects a problem in that path. P0671 refers specifically to the cylinder 1 glow plug circuit; the code alone does not identify the cause.

P0671 symptoms

Depending on the vehicle and conditions, symptoms may include difficult cold starting, rough running shortly after startup, reduced performance, or an illuminated warning light. Some vehicles may show few noticeable symptoms.

Possible causes of P0671

Possible causes include a glow plug fault, damaged or loose wiring or connectors, or a problem in the glow plug control circuit. These are possibilities only; diagnosis is needed to identify the actual cause.

How to diagnose P0671

  1. Record the code and check for other stored codes and relevant symptoms.
  2. Consult the vehicle’s service information to confirm the circuit layout and test procedure.
  3. With the engine off, visually check accessible cylinder 1 wiring and connectors for looseness or damage.
  4. Have a qualified technician test the glow plug circuit and its components using the vehicle-specific procedure.
  5. After repairs, clear the code and verify whether it returns under appropriate operating conditions.

How to fix P0671

Repair depends on the test results. A technician may need to address a wiring or connection issue, a glow plug, or another part of the control circuit. Avoid replacing parts based on the code alone, and use vehicle-specific service information.

Can I drive with P0671?

P0671 does not by itself establish whether the vehicle is safe to drive. If it starts and runs normally, arrange diagnosis soon, especially before cold weather. If starting becomes difficult, the engine runs poorly, or other warning signs appear, limit driving and seek professional advice.

P0671 frequently asked questions

What does P0671 mean?

It means the cylinder 1 glow plug circuit is open or has an electrical interruption. It does not confirm which component is at fault.

Does P0671 mean the cylinder 1 glow plug has failed?

Not necessarily. The glow plug is one possibility, but wiring, connectors, or the control circuit may also be involved.

Can I drive with P0671?

The code alone cannot determine drivability. Consider symptoms and have the circuit checked; seek help promptly if the engine is hard to start or runs poorly.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.