P0708 Code: Meaning & Diagnostic Guide
Transmission Range Sensor A Circuit High
What does P0708 mean?
P0708 quick answer
P0708 is a generic OBD-II code meaning “Transmission Range Sensor A Circuit High.” It indicates that the vehicle’s control system detected a higher-than-expected electrical signal in the transmission range sensor A circuit; it does not by itself identify a failed part.
Is P0708 generic or manufacturer-specific?
P0708 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P0708 works in the vehicle
The transmission range sensor reports the selected gear or range to the vehicle’s control system. “Circuit high” means the signal was above the expected level. The code alone does not establish why this happened or which component, if any, needs replacement.
P0708 symptoms
Depending on the vehicle and the underlying issue, possible signs may include an incorrect or missing gear indication, difficulty starting, shifting concerns, or a warning light. A vehicle may also show no obvious symptoms.
Possible causes of P0708
Possible explanations include an electrical connection or wiring issue, a sensor signal problem, or another fault affecting the circuit. These are possibilities, not confirmed causes; P0708 alone does not prove that the sensor has failed.
How to diagnose P0708
- Confirm the code with a suitable scan tool and note any other stored codes or available freeze-frame information.
- Check whether the displayed or reported gear range matches the selector position, if the vehicle provides that information.
- Inspect the relevant wiring and connectors for visible damage, looseness, or corrosion, following vehicle-specific service information.
- Have the circuit and sensor signal tested using the procedures and specifications for the specific vehicle before deciding what to repair.
How to fix P0708
The appropriate repair depends on test results and vehicle-specific information. A qualified technician can check the circuit, connections, and sensor operation before replacing parts; the code alone is not sufficient grounds to replace a component.
Can I drive with P0708?
P0708 does not by itself establish whether a vehicle is safe to drive. If gear selection, starting, or shifting is unreliable, stop somewhere safe and seek professional advice rather than continuing to drive. If there are no noticeable problems, arrange a timely diagnosis and follow the vehicle’s manual.
P0708 frequently asked questions
What does P0708 mean?
P0708 is a generic code for Transmission Range Sensor A Circuit High. It means the control system detected a higher-than-expected signal in that circuit.
Does P0708 mean the transmission range sensor is bad?
No. The code identifies a circuit signal condition, not a confirmed failed component. Testing is needed to find the cause.
Can I drive with P0708?
The code alone cannot determine whether driving is safe. If the vehicle has trouble starting, selecting a gear, or shifting, stop safely and get professional advice.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.