Source-backed diagnostic reference

P071E Code: Meaning & Diagnostic Guide

Transmission Mode Switch B Circuit Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P071E mean?

  • GENERIC: Transmission Mode Switch B Circuit Low Source
  • GENERIC: Transmission Mode Switch B Circuit Low Source

P071E quick answer

P071E is a generic diagnostic trouble code meaning “Transmission Mode Switch B Circuit Low.” It indicates that the vehicle’s control system detected a signal below the expected range in the Mode Switch B circuit; it does not, by itself, identify a failed part.

Is P071E generic or manufacturer-specific?

P071E has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P071E works in the vehicle

A transmission mode switch reports a selected transmission mode or range to the vehicle’s control system. “Circuit low” describes a detected electrical signal that is lower than expected. The precise circuit design and test limits depend on the vehicle.

P071E symptoms

Depending on the vehicle and the underlying issue, there may be no noticeable symptoms or there may be transmission-mode indication or shifting concerns. The code alone does not confirm that any particular symptom is present.

Possible causes of P071E

Possibilities include a switch or circuit fault, damaged wiring, a poor electrical connection, or another vehicle-specific issue. P071E alone does not confirm which, if any, component has failed.

How to diagnose P071E

  1. Record P071E and any other stored codes, along with available freeze-frame data.
  2. Use vehicle-specific service information to identify the Mode Switch B circuit and its expected operation.
  3. Check the relevant switch, wiring, and connectors for visible damage, corrosion, looseness, or poor contact.
  4. Use appropriate scan-tool data and vehicle-specific electrical tests to determine whether the switch signal and circuit behave as specified.
  5. Recheck for codes after any verified repair.

How to fix P071E

Base repairs on vehicle-specific test results. Correct a verified wiring or connection issue, or replace a component only if testing identifies it as faulty. If the cause is unclear, have a qualified technician diagnose the circuit.

Can I drive with P071E?

Driving impact cannot be determined from P071E alone. If shifting or mode selection is abnormal, or the vehicle behaves unpredictably, avoid continued driving and arrange professional assessment. Otherwise, consult vehicle-specific guidance and have the code diagnosed.

P071E frequently asked questions

What does P071E mean?

It means the control system detected a low signal in the generic Transmission Mode Switch B circuit.

Does P071E prove the mode switch has failed?

No. The code identifies a circuit condition, not a confirmed failed component. Testing is needed to find the cause.

Can I drive with P071E?

The code alone does not establish whether driving is safe. Consider how the vehicle is behaving and seek professional advice, especially if shifting or mode selection is abnormal.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.