Source-backed diagnostic reference

P0742 Code: Meaning & Diagnostic Guide

Torque Converter Clutch Circuit Stuck On

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0742 mean?

  • GENERIC: Torque Converter Clutch Circuit Stuck On Source
  • GENERIC: Torque Converter Clutch Circuit Stuck On Source

P0742 quick answer

P0742 is a generic powertrain code meaning “Torque Converter Clutch Circuit Stuck On.” It indicates the system has detected that the torque converter clutch may be staying engaged when it should release; the code alone does not confirm which part is at fault.

Is P0742 generic or manufacturer-specific?

P0742 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0742 works in the vehicle

The torque converter transfers engine power to the transmission. Its clutch can lock the converter to reduce slipping under suitable driving conditions. “Stuck on” means the clutch or its control appears to remain engaged when the system expects it to release.

P0742 symptoms

Depending on the vehicle and the underlying issue, symptoms may include stalling as the vehicle stops, harsh or unusual shifting, engine speed dropping unexpectedly, or a warning light. A stored code may also be present without obvious symptoms.

Possible causes of P0742

Possible causes include a problem in the clutch control circuit, wiring or connections, transmission fluid or hydraulic operation, or a torque converter or transmission component. The code by itself does not identify a confirmed failed component.

How to diagnose P0742

  1. Confirm the code with a suitable scan tool and note any other codes and available freeze-frame information.
  2. Check the vehicle’s service information for the correct diagnostic procedure and operating conditions.
  3. Inspect relevant wiring and connectors for visible damage or poor connections.
  4. Check transmission fluid condition and level only using the procedure specified for the vehicle.
  5. Have a qualified technician test clutch operation and its electrical and hydraulic controls before replacing parts.

How to fix P0742

The repair depends on the results of diagnosis. A technician may need to address a wiring, fluid, control, or internal transmission issue. Avoid replacing the torque converter or other parts based only on this code.

Can I drive with P0742?

Driving suitability depends on the vehicle’s behavior and the manufacturer’s guidance. If it stalls, shifts abnormally, or behaves unpredictably, stop driving when safe and arrange professional inspection. Otherwise, seek prompt diagnosis and consult the owner’s manual.

P0742 frequently asked questions

Does P0742 identify a failed torque converter?

No. It describes a detected torque converter clutch condition, not a confirmed failed part. Further diagnosis is needed.

Can P0742 cause a vehicle to stall?

It may be associated with stalling, particularly as the vehicle slows or stops, but symptoms vary and the code alone does not confirm the cause.

Can I keep driving with P0742?

That depends on the symptoms and vehicle guidance. Stalling or unpredictable transmission behavior warrants stopping when safe and arranging inspection.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.